Update your GoPro through the official app or a computer

The fastest way to update your GoPro is through the GoPro Quik app on your phone. Connect your camera to the app via Bluetooth, open the camera settings, and tap the firmware version number — the app will read and install any available update automatically. If you prefer a computer, plug your GoPro into a Mac or Windows PC with a USB cable, visit gopro.com/update, and follow the on-screen prompts. Both methods take 10 to 30 minutes depending on your internet speed and which model you own.

Before you start, charge your camera to at least 50 percent battery. A dead battery during an update can corrupt the firmware and leave your camera unusable. Also clear any space on your memory card — the update process needs room to work, and a full card can cause the installation to fail partway through.

Key Takeaways

  • The GoPro Quik app is the easiest method for most users because it handles the read and installation without leaving your phone.
  • Charging your camera to at least 50 percent battery before starting prevents corruption if the power cuts out mid-update.
  • Updates typically take 10 to 30 minutes, and your camera will restart several times during the process — this is normal.
  • If an update fails, force-restart your camera by holding the power button for 10 seconds, then try again from the beginning.

Using the GoPro Quik app on your phone

Open the GoPro Quik app and make sure your phone's Bluetooth is on. Tap the camera icon at the bottom of the screen, then select your GoPro model from the list. The app will pair with your camera — you may see a pairing request on the camera screen that you need to confirm by pressing the shutter button.

Once paired, tap the settings icon (usually a gear symbol) and scroll down to find the camera information or firmware section. Tap the firmware version number. If an update is available, a read button will appear. Tap it, and the app will read the update file — this can take a few minutes on a slower connection. Do not close the app or turn off your phone during this step.

When the read finishes, the app will prompt you to install. Tap install, and your camera will restart automatically. You will see a progress bar on the camera screen. Let it run to completion without touching the camera or disconnecting it from your phone. Once the restart is done, the app will confirm the update succeeded.

Using a computer and the GoPro website

Plug your GoPro into a Mac or Windows PC using the USB cable that came with your camera. Open a web browser and go to gopro.com/update. The page will detect your camera model automatically. If it does not, select your model from the dropdown menu.

Click the read button to get the firmware file. Save it to your desktop or a folder you can find easily. Once the read finishes, the website will show you a second button to begin the installation. Click it, and the website will guide you through the rest — your camera will restart and install the update on its own. The process usually takes 15 to 25 minutes. Leave your camera plugged in and do not interrupt the installation.

What to do if the update fails or gets stuck

If your camera freezes during an update or shows an error message, force-restart it by holding the power button down for 10 full seconds. The camera will shut off completely. Wait 30 seconds, then turn it back on and try the update again from the beginning.

If the same error happens twice, disconnect your camera from your phone or computer and let it sit for five minutes with the battery still in. Then reconnect and try once more. If it fails a third time, the memory card may be corrupted — try formatting the card inside the camera (this erases all footage, so back up anything you want to keep first), then attempt the update again.

Checking which firmware version you have

Open the GoPro Quik app and connect to your camera. Tap settings, then scroll to camera information or about. The firmware version number appears there. You can also check on the camera itself by pressing the power button once to turn it on, then holding the mode button until you see the settings menu. Scroll to about or camera info to see the version.

Write down your current version number before you start the update so you can confirm it changed afterward. After a successful update, the version number will be higher than what you started with.

Why your GoPro needs firmware updates

Firmware updates fix bugs that cause crashes or video corruption, add new recording modes or frame rates, and improve battery life and autofocus performance. GoPro releases updates roughly every two to four months, though some are critical security patches that come more often. Keeping your camera current ensures it works as designed and takes advantage of features you may have paid for but could not use on older firmware.

Updates are always free. GoPro never charges for firmware, and you do not need a subscription or account to install one — you only need the camera, a charged battery, and an internet connection to read the file.

Frequently Asked Questions

Can I use my GoPro while it is updating?

No. Your camera will be locked and unusable during the update process. Do not try to power it off or disconnect it. The update typically takes 10 to 30 minutes depending on your model and internet speed. Plan for this downtime if you need the camera for a shoot.

What happens if my internet cuts out during the read?

If the read fails before installation begins, your camera is not affected — just reconnect and try again. If the internet cuts out during the actual installation on your camera, force-restart the camera and try the entire update process from the beginning. The incomplete update will not damage your camera.

Do I need a computer to update, or can I do it only on my phone?

The GoPro Quik app on your phone is the easiest method for most people. A computer is an alternative if you prefer it or if your phone has Bluetooth problems. You do not need both — pick whichever is more convenient for you.

Will updating erase my videos or photos?

No. Firmware updates do not touch your footage or settings. Everything on your memory card stays exactly as it is. The update only replaces the camera's internal software.

How often should I update my GoPro?

Update whenever a new version is available. GoPro releases updates every few months, and each one improves performance or adds features. There is no downside to staying current, and delaying updates can leave you with bugs or missing features that newer firmware fixes.