Update Your GoPro Through the Official App or Desktop Software
The fastest way to update your GoPro is through the GoPro Quik app, which works on both iPhone and Android. Connect your camera to your phone via Bluetooth, open the app, and the software will prompt you if an update is available. Tap the update button, keep your camera powered on and connected, and wait for the process to finish — usually 5 to 15 minutes depending on the file size.
If you prefer a computer, read GoPro Quik for desktop from the official GoPro website, connect your camera with a USB cable, and follow the same prompts. The desktop version sometimes runs faster on older phones or if your Bluetooth connection is unstable.
Both methods require your camera battery to be at least 50% charged before you start. If the battery is too low, the app will refuse to begin and ask you to charge first. Stopping an update mid-way can corrupt your camera's software, so plan for uninterrupted time.
Key Takeaways
- The GoPro Quik app on your phone is the easiest update method and takes 5 to 15 minutes once connected.
- Your camera battery must be at least 50% full before any update begins, or the app will block you from proceeding.
- Never disconnect your camera or close the app while an update is running, as this can permanently damage the firmware.
- Updates add new features, fix bugs, and improve camera stability, so checking for them every few months is worth the time.
Check Your Current Firmware Version Before You Start
Before updating, it helps to know what version you are running. On your GoPro, go to Preferences (or Settings on older models), scroll to About, and look for the firmware number — it will look something like "H23.01.02.00". Write this down or take a screenshot.
When you open the GoPro Quik app and connect your camera, it will show you the current version and the available version side by side. If they match, your camera is already up to date and no action is needed. If they differ, the app will show you what features or fixes the new version includes.
Knowing your current version also helps if something goes wrong during the update. You can tell GoPro support exactly where you started, which speeds up troubleshooting.
Prepare Your Camera and Connection Before Updating
A stable connection is the most important part of a successful update. If you are using the app, make sure Bluetooth is turned on in your phone settings and your camera is in pairing mode. Most GoPros enter pairing mode automatically when you open the app, but some older models require you to hold the Mode button for three seconds first.
If your Bluetooth keeps dropping, move closer to your phone, turn off Wi-Fi on your camera (if it has that option), and close other apps running in the background. Bluetooth and Wi-Fi can interfere with each other, so disabling Wi-Fi often solves connection problems.
For the desktop method, use a high-quality USB cable — the one that came with your camera is your safest bet. Cheap third-party cables sometimes cause connection drops that interrupt the update. Plug directly into a USB port on your computer, not a hub, for the most stable connection.
What to Do If the Update Fails or Gets Stuck
If the app freezes or shows an error message, force-close the app completely (swipe it away on iPhone, or use the app switcher on Android), then restart your phone. Reconnect your camera and try again. Most failures are connection hiccups that clear up on a second attempt.
If the update fails twice in a row, try the desktop version instead. Desktop connections are often more reliable than Bluetooth, especially if your phone is older or has limited memory. read the latest version of GoPro Quik for your computer from the official website, not from a third-party source.
If your camera is stuck on a loading screen or will not turn on after a failed update, plug it into a computer with the USB cable and leave it connected for 10 minutes. Sometimes the camera needs power and a stable connection to recover. If that does not work, contact GoPro support with your camera model and the firmware version you were trying to install.
Why Firmware Updates Matter for Your Camera
Firmware is the software that runs your GoPro. Updates add new recording modes, improve battery life, fix bugs that cause crashes, and patch security issues. A camera running old firmware may have features that do not work as intended or may drain the battery faster than it should.
GoPro releases updates roughly every few months, though the timing varies. You do not need to update the moment a new version drops, but checking every two or three months keeps your camera running smoothly. If you notice your camera is crashing, overheating, or the battery is draining unusually fast, an update often fixes it.
Newer firmware also ensures your camera works well with the latest version of the GoPro Quik app. If you update the app but not the camera firmware, you may run into compatibility issues where certain features do not work or the app crashes when you try to use them.
Frequently Asked Questions
Can I update my GoPro without the official app?
No, you need either the GoPro Quik app or the desktop software. GoPro does not support manual firmware downloads or updates through other methods. If you cannot use the app on your phone, the desktop version is your only alternative.
How long does a firmware update usually take?
Most updates take 5 to 15 minutes from start to finish. Larger updates or slower connections may take up to 30 minutes. The app shows a progress bar, so you can see how much time is left. Do not unplug or disconnect your camera until it reaches 100%.
Will updating erase my videos or photos?
No, firmware updates do not touch your files. Your videos, photos, and settings stay exactly as they are. The update only changes the camera's internal software.
What if my camera is too old to update?
Older GoPro models sometimes stop receiving updates once they reach a certain age. Check the GoPro website or open the Quik app with your camera connected — if no update is available and your firmware version has not changed in months, your model has likely reached the end of its update cycle. The camera will still work, but it will not receive new features or security patches.
Do I need Wi-Fi to update my GoPro?
No, you only need a Bluetooth connection (for the app) or a USB cable (for desktop). The update file is downloaded to your phone or computer first, then sent to the camera. You do not need your camera connected to Wi-Fi at any point.