Firmware updates add features, fix bugs, and improve camera performance

GoPro releases firmware updates regularly to add new recording modes, improve battery life, fix known issues, and enhance video quality. Updating your camera takes 10 to 20 minutes and requires a charged battery, a computer or smartphone, and an internet connection. The process differs slightly depending on whether you use a Mac, Windows PC, or mobile device, but all three routes are straightforward once you know the steps.

Your GoPro will not update itself automatically. You must check for updates and install them manually. The camera will tell you when an update is available, but only if you connect it to the GoPro app or visit the GoPro website. Older firmware versions may lack features released in newer updates, so checking every few months is a good habit.

Key Takeaways

  • Connect your GoPro to a computer or use the GoPro app on your phone to check for and install firmware updates.
  • Your camera battery must be at least 50 percent charged before you start an update, or the process will fail and you may need to restart it.
  • Updates typically take 5 to 15 minutes to read and install, and your camera will restart automatically when finished.
  • You can update using a Mac, Windows PC, or the GoPro app on iOS or Android — choose whichever method is most convenient for you.

Updating firmware on Windows or Mac using a computer

The most reliable way to update is through a computer. Start by charging your GoPro to at least 50 percent battery. Connect the camera to your computer using the USB cable that came with it — plug the cable into the camera's USB-C port (or micro-USB on older models) and the other end into a USB port on your computer. The camera will power on automatically when you plug it in.

Open a web browser and go to gopro.com/update. The website will detect your camera model automatically and show you whether an update is available. If one is ready, click the read button. The firmware file will read to your computer — this usually takes 2 to 5 minutes depending on your internet speed. Once the read finishes, follow the on-screen instructions to transfer the update to your camera. Do not unplug the camera or close the browser window during this step.

Your camera will restart and begin installing the update. You will see a progress bar on the camera's screen. This process takes 5 to 15 minutes. Let the camera finish completely — do not turn it off or unplug it. When the update is done, the camera will restart again and return to the normal home screen. You can then unplug the USB cable.

Updating firmware using the GoPro app on your phone

If you do not have a computer nearby, you can update using the GoPro app on your iPhone or Android phone. read the GoPro app from the App Store (iOS) or Google Play (Android) if you do not already have it. Open the app and sign in with your GoPro account, or create one if you are new to GoPro.

Turn on your GoPro and make sure its battery is at least 50 percent charged. In the app, tap the camera icon or settings menu to connect to your camera. The app will search for your camera and ask you to confirm the connection on the camera itself — follow the prompts on both screens. Once connected, the app will check for firmware updates automatically.

If an update is available, the app will show a notification. Tap the update button and confirm that you want to proceed. The app will read the firmware to your phone and then transfer it to your camera over your Wi-Fi connection. Keep your phone and camera close together during this process — if the connection drops, the update may fail. The transfer and installation take 5 to 15 minutes. Your camera will restart when finished.

What to do if the update fails or gets stuck

If the update stops partway through or your camera freezes, do not panic. First, try restarting the process. Unplug the camera from your computer or disconnect it from your phone, wait 30 seconds, and plug it back in. Check that your camera battery is still above 50 percent — if it has dropped below that, charge it fully before trying again.

If the update fails a second time, try a different method. If you updated via computer, try the GoPro app instead, or vice versa. Make sure you are using the latest version of the GoPro app — open your phone's app store and check for updates to the GoPro app itself. If you are updating on a computer, try a different USB port or a different cable if you have one available.

If the camera will not turn on after a failed update, connect it to power and let it charge for at least 30 minutes. Then try the update process again. In rare cases, you may need to contact GoPro support for help, but most failed updates recover by straightforward trying again with a fully charged battery.

Common mistakes that slow down or break updates

The most common mistake is starting an update with a low battery. If your camera battery drops below 50 percent during an update, the process will stop and you will have to start over. Always charge your camera fully before you begin, even if the battery indicator shows 50 percent or higher.

Unplugging the camera or closing the browser window during the read or transfer step will interrupt the update and force you to restart. Leave everything connected and do not touch the camera until the progress bar reaches 100 percent and the camera restarts on its own.

Using a damaged or low-quality USB cable can cause the connection to drop during the update. If you have a cable that came with your GoPro or another high-quality cable, use that instead of a cheap third-party option. Similarly, if you are updating over Wi-Fi using the app, move closer to your router to may support a strong signal.

How to check what firmware version your camera is running

You can see your current firmware version directly on the camera. Open the camera menu, scroll to Settings, and look for "About" or "System Info." The firmware version will be listed there — it usually looks like a number such as "H.12.01.01.00" or similar. Write this number down or take a screenshot so you can compare it to the latest version available on gopro.com.

You can also check your firmware version in the GoPro app. Connect your camera to the app, tap the settings icon, and scroll to "Camera Info" or "About." The current firmware version will appear there. This is useful if you want to check whether an update is available without connecting to a computer.

What changes after you update

After a successful update, your camera will work exactly as it did before, but with new features or improvements. You may notice faster autofocus, longer battery life, new video recording modes, or fixes to bugs that existed in the older version. Check the GoPro website or the release notes in the app to see what changed in the version you just installed.

Your videos and photos will not be deleted or changed by a firmware update. All your existing files remain on the camera's memory card. The update only changes the software that runs the camera, not the content you have already recorded.

Frequently Asked Questions

Do I have to update my GoPro firmware?

No, but updates often include performance improvements and new features. If your camera is working well and you do not need the new features, you can skip an update. However, if you notice bugs or want access to new recording modes, updating is worth the 15 minutes it takes.

Can I update my GoPro without a computer or phone?

No. You need either a computer with internet access or a smartphone with the GoPro app to read and transfer the firmware. The camera itself cannot read updates directly from the internet.

How often does GoPro release firmware updates?

GoPro releases updates several times a year, but the exact schedule varies. Some updates are minor bug fixes released every few months, while others add major features and may come out once or twice a year. Check gopro.com/update every few months to see if a new version is available.

Will updating erase my videos or photos?

No. Firmware updates only change the camera's software. All your recorded videos, photos, and settings remain on the memory card and are not affected by the update.

What should I do if my camera is very old and no longer receives updates?

Older GoPro models eventually stop receiving firmware updates when the company moves on to newer hardware. If your camera is no longer supported, you can continue using it with the last firmware version it received. Check gopro.com/update to confirm whether your specific model still receives updates.