Getting Your GoPro Hero 3 Ready to Record
The GoPro Hero 3 records video and photos using a memory card and rechargeable battery. Before you film anything, you need to charge the battery fully, insert a memory card, and power on the camera. The entire setup takes about 15 minutes if the battery is already charged.
Start by locating the USB charging cable that came in your box. Plug the small end into the port on the side of the camera (under the rubber flap marked with a lightning bolt symbol) and the large end into a wall outlet or computer. A red light on the camera means it is charging; a green light means the battery is full. Charging from empty takes roughly two hours.
While the battery charges, prepare your memory card. The Hero 3 uses a standard microSD card—the small rectangular card, not the full-size SD card. Insert it into the slot on the side of the camera with the gold contacts facing inward. Push gently until you hear a click. The camera will format the card the first time you power it on, which erases anything already on it.
Key Takeaways
- Charge the battery fully using the included USB cable before your first recording session, which takes about two hours.
- Insert a microSD memory card into the side slot and let the camera format it on first power-up.
- Press the power button on top to turn on the camera, then press the shutter button on the front to start and stop recording.
- The camera defaults to 1080p video at 30 frames per second, which works well for most situations without changing settings.
- Check the remaining battery and storage space using the status screen before you leave to film.
Powering On and Understanding the Display
Press the power button on the top of the camera to turn it on. The screen on the back will light up and show you what the front lens sees. You will see a row of icons and numbers at the bottom of the screen—these tell you the current recording mode, battery level, and how much space is left on your memory card.
The Hero 3 has three main recording modes: video, photo, and burst photo. The camera starts in video mode by default. If you see a camera icon instead of a video camera icon, press the mode button (the small button on the back, below the screen) to switch to video recording. The icon will change to show a video camera symbol.
Look at the battery icon in the bottom right corner. A full battery shows four white bars; each bar disappears as the battery drains. If you see only one bar, you have roughly 30 minutes of recording time left. The memory card icon shows how many minutes of video space remain. If this number is zero, you need to delete old footage or use a new card.
Recording Your First Video
Once the camera is on and in video mode, point the lens at what you want to film. Press the shutter button on the front of the camera—it is the large red button. You will hear a beep and see a red circle appear on the screen. This red circle means the camera is recording.
The camera records continuously until you press the shutter button again. The red circle will disappear and you will hear another beep. The video is now saved to your memory card. Most videos are saved as individual files of about 4 gigabytes each; if you film for longer than 12 minutes without stopping, the camera automatically starts a new file.
Do not remove the memory card or battery while the red circle is on the screen—this can corrupt your video file. Wait for the beep and the red circle to vanish before you stop filming or change any settings. If the camera shuts off unexpectedly, the last few seconds of video may be lost, but earlier footage is usually safe.
Changing Resolution and Frame Rate
The Hero 3 records at 1080p resolution and 30 frames per second by default. This setting works for most situations—it produces clear video that plays smoothly on phones, tablets, and computers. You can change these settings if you want slower motion, higher quality, or smaller file sizes.
To access the settings menu, press the menu button (the small button on the back, above the screen). Use the arrow buttons to scroll down to "Video Resolution" and press the shutter button to open it. You will see options like 1080p, 720p, and 960p. Select the one you want and press the shutter button to confirm. Then scroll to "Frame Rate" and choose between 30fps (standard), 60fps (slow motion), or 24fps (cinematic look).
Higher resolution and higher frame rates use more memory card space and drain the battery faster. A 32-gigabyte memory card holds about 4 hours of 1080p video at 30fps, but only about 2 hours at 1080p and 60fps. If you plan to film for a long time, stick with the default settings or use a larger memory card.
Taking Photos and Burst Photos
To switch from video to photo mode, press the mode button on the back of the camera until you see a camera icon on the screen instead of a video camera icon. Point the lens at your subject and press the shutter button. You will hear a beep and the screen will flash white briefly. The photo is saved to your memory card.
Burst photo mode takes multiple photos in rapid succession with a single button press. This is useful for action shots where you want to pick the sharpest frame later. Press the mode button until you see a burst photo icon (it looks like three overlapping squares). Press the shutter button once and hold it down. The camera will take photos as fast as it can—usually about 10 photos per second—until you release the button.
Photos take up much less space than video. A 32-gigabyte memory card can hold thousands of photos. However, burst mode files are large; a 10-second burst at 10 photos per second creates 100 individual image files that add up quickly.
Transferring Video and Photos to Your Computer
To move your videos and photos off the camera, connect it to a computer using the USB cable. Plug the small end into the camera and the large end into a USB port on your computer. The camera will appear as a removable drive or external hard drive on your desktop or in your file manager.
Open the camera drive and look for a folder called DCIM. Inside that folder is another folder with a name like 100GOPRO. All your videos and photos are stored inside this folder. You can copy and paste them to your computer's hard drive, an external drive, or cloud storage just like any other file.
Do not delete files directly from the camera using your computer. Instead, use the camera's own delete function: press the menu button, scroll to "Delete", and choose to delete individual files or all files. This prevents accidental corruption of the memory card's file system.
Troubleshooting Common Problems
If the camera will not turn on, the battery may be completely drained. Plug it in and wait at least 30 minutes before trying again. If it still will not power on, try a different USB cable or charger—the original cable may be damaged.
If you see a message that says "Memory Card Error" or "Card Full", the memory card may be corrupted or full. Try deleting some old videos using the camera's menu. If the error persists, format the card using the menu (this erases everything on it). If formatting does not work, the card may be damaged and you will need a replacement.
If video is blurry or out of focus, make sure the lens is clean. Wipe it gently with a soft, dry cloth. If the video is still blurry, you may be filming in very low light. The Hero 3 performs best in bright daylight or well-lit indoor spaces. In dim light, video becomes grainy and blurry no matter what settings you use.
If the camera shuts off during recording, the battery may be low even if the icon shows one bar remaining. Charge the battery fully and try again. If it shuts off when ready after powering on, the battery may be defective and need replacement.
Frequently Asked Questions
What size memory card do I need for the GoPro Hero 3?
Use a microSD card with at least 32 gigabytes of storage. The camera works with cards up to 128 gigabytes, but larger cards are not necessary unless you plan to film for many hours without transferring files to a computer. Make sure the card is rated for at least Class 10 speed to avoid dropped frames during recording.
How long does the battery last during recording?
The battery lasts roughly 1.5 to 2 hours of continuous recording in normal conditions. Cold temperatures drain the battery much faster—in freezing weather, expect only 45 minutes to an hour. Turning off the screen (press the power button once without holding it) extends battery life by about 20 minutes.
Can I record while the camera is charging?
No. The Hero 3 must be powered off to charge. You cannot film while plugged into a USB cable. If you need to record for longer than the battery allows, bring a second fully charged battery and swap them out between filming sessions.
What video format does the GoPro Hero 3 use?
The camera records in MP4 format, which plays on most computers, phones, and tablets without needing special software. The video codec is H.264, which is a standard format supported by all modern video editing programs and media players.
Do I need a waterproof case to use the camera underwater?
Yes. The Hero 3 itself is not waterproof. You must use the waterproof housing that came in the box if you want to film in water. The housing is rated to 40 meters (about 130 feet) underwater. Make sure the seals are clean and dry before closing it, and check them regularly for cracks or damage.