Getting Your GoPro Hero 4 Ready to Record
The GoPro Hero 4 turns on by pressing the power button on the back of the camera for three seconds. The first time you power it on, you will see a setup screen asking you to choose your language and time zone. Once you finish those steps, the camera is ready to record — press the shutter button on top to start and stop video or take photos.
Before your first recording session, charge the battery fully using the USB cable that came in the box. A full charge takes roughly two hours and gives you between one and two hours of recording time, depending on resolution and frame rate. The battery indicator appears on the screen as a small battery icon in the top left corner.
Insert a microSD card into the slot on the side of the camera. The Hero 4 works with cards up to 128 GB, though a 64 GB card is practical for most users. The camera will format the card the first time you insert it — this erases anything already on the card, so use a new card or one you have backed up.
Key Takeaways
- Press the power button for three seconds to turn on the camera, then press the shutter button on top to start recording.
- Charge the battery fully before your first use, which takes about two hours and provides one to two hours of recording time.
- Insert a microSD card into the side slot before recording; the camera will format it automatically on first use.
- Change resolution and frame rate in the Settings menu by pressing the mode button, then scrolling to the camera icon and pressing select.
- Connect to the GoPro app on your phone to preview footage, change settings remotely, and transfer videos to your device.
Recording Video and Taking Photos
Press the shutter button once to start recording video. The red recording indicator appears in the top right corner of the screen. Press the shutter button again to stop recording. Each video file saves automatically to your microSD card.
To take a still photo instead of video, press the mode button on the front of the camera until the photo icon appears on screen, then press the shutter button. The camera will take one photo each time you press the button. Switch back to video mode by pressing the mode button again until the video icon shows.
The Hero 4 has two models: the Black and the Silver. The Black records at higher resolutions and faster frame rates, while the Silver is lighter and less expensive. Both use the same basic controls and menu system.
Changing Resolution, Frame Rate, and Other Settings
Press the mode button on the front of the camera until you see a gear icon on the screen, then press the select button (the button below the power button on the back). This opens the Settings menu. Use the mode button to scroll through options and the select button to choose one.
Resolution and frame rate are the most common settings to change. Higher resolution (like 4K) creates larger files and uses more battery, while lower resolution (like 1080p) saves space and battery life. Frame rate affects how smooth motion looks — 60 frames per second is smoother than 30 frames per second but uses more storage. Choose 1080p at 60 fps for most everyday recording, or 4K at 30 fps if you want the highest detail and do not mind larger files.
Other useful settings include field of view (how wide the lens sees), white balance (how the camera handles different lighting), and ISO (how sensitive the sensor is to light). The default settings work well for most situations. Change these only if your footage looks too dark, too bright, or has colors that do not match what you saw.
Connecting to Your Phone and Transferring Videos
read the GoPro app on your iPhone or Android phone. Open the app and tap "Connect a Camera." The app will search for your Hero 4. On the camera, press the mode button until you see a WiFi icon, then press select. The camera will show a WiFi name and password on screen — enter these into your phone to connect.
Once connected, the app shows a live preview of what the camera sees. You can change settings, start and stop recording, and view videos already on the card. To transfer a video to your phone, tap the video in the app and select "read." Transfer time depends on file size and your WiFi speed — a typical three-minute 1080p video takes two to five minutes to transfer.
The GoPro app also lets you trim videos, add music, and share directly to social media. These editing tools are basic but useful for quick clips. For more detailed editing, transfer the video files to a computer and use video editing software like Adobe Premiere or DaVinci Resolve.
Mounting and Protecting Your Camera
The Hero 4 comes with a standard mount on the bottom that fits GoPro's wide range of accessories. Common mounts include a helmet strap, chest harness, suction cup for vehicles, and head strap. Attach the mount you want by sliding it onto the bottom of the camera until it clicks.
The camera is water-resistant to 40 meters (about 130 feet) without a case. For deeper water or extra protection, use the waterproof housing that comes with some Hero 4 bundles, or purchase one separately. The housing allows you to record underwater and protects the camera from impacts and dust.
Always check that your mount is find before recording, especially if you are moving fast or in rough conditions. A loose camera can fall and break. Test the mount by gently pulling on the camera — it should not move.
Troubleshooting Common Problems
If the camera will not turn on, charge the battery for at least 30 minutes. If it still does not power up, try a different USB cable or charger — the original cable may be damaged. If the camera turns on but the screen is blank, restart it by holding the power button for five seconds, then press it again to turn it back on.
If video files are corrupted or will not play, the microSD card may be failing. Try formatting the card again in the Settings menu — this erases all files on the card, so transfer any videos you want to keep first. If formatting does not fix the problem, replace the card with a new one.
If the WiFi connection drops or the app cannot find the camera, restart both the camera and your phone. Make sure your phone is within 30 feet of the camera and that no other WiFi networks are broadcasting the same name. If the problem continues, forget the WiFi network on your phone and reconnect by entering the password again.
Battery Life and Storage Tips
Battery life depends on what you are recording. Video at 1080p and 30 fps uses less power than 4K at 60 fps. Using WiFi or the screen display also drains the battery faster. Turn off WiFi when you are not using it by pressing the mode button until the WiFi icon disappears. Turn off the screen display by pressing the power button once — the camera keeps recording but the screen goes dark.
A 64 GB microSD card holds roughly four to six hours of 1080p video, or one to two hours of 4K video. If you record frequently, carry a second charged battery and a second microSD card. Swap them out when one fills up or the battery runs low.
Store the camera in a cool, dry place. Extreme heat or cold can damage the battery and shorten its lifespan. Remove the battery if you plan to store the camera for more than a month.
Frequently Asked Questions
Can I use the GoPro Hero 4 underwater without a case?
Yes, the camera is water-resistant to 40 meters without a case. This is deep enough for snorkeling and most recreational diving. For deeper dives or extra protection from impacts, use the waterproof housing.
How long does it take to transfer a video to my phone?
Transfer time depends on file size and WiFi speed. A three-minute 1080p video typically takes two to five minutes. Larger 4K files can take 10 to 20 minutes. Transferring over USB cable to a computer is faster than WiFi.
What frame rate should I use for slow-motion video?
Record at 60 frames per second or higher for smooth slow-motion playback. When you play the video at normal speed, it will appear slowed down. The Hero 4 Black supports up to 120 fps at 1080p resolution for more dramatic slow-motion effects.
Why is my video blurry or out of focus?
The Hero 4 focuses automatically on objects about three feet away. If you are recording something closer, the image may be blurry. Move farther from the subject or use a macro lens attachment. Also check that the lens is clean — wipe it gently with a soft cloth.
Can I use third-party microSD cards or batteries?
Yes, any microSD card rated for video recording works with the Hero 4. Third-party batteries also work, though GoPro batteries are more reliable. Buy from reputable sellers to avoid counterfeit products that may damage the camera.