Start with the basics: charge, insert the card, and power on
Your GoPro is ready to record within minutes of opening the box. First, charge the battery fully using the USB-C cable that comes with it — this takes about two hours. While it charges, insert a microSD card into the slot on the side of the camera (the card goes in with the gold contacts facing the camera). Use a card rated for video: SanDisk Extreme, Kingston Canvas Go, or similar brands marked for 4K recording work well and cost between $15 and $40 depending on storage size.
Once charged, power on the camera by pressing the power button on top. The screen will light up and show you the main menu. You are now ready to record. The camera defaults to video mode, which is where most beginners start.
Key Takeaways
- Charge the battery fully before your first use, and always insert a microSD card before recording — the camera will not save footage without one.
- Press the red record button on top to start and stop recording; the red light on the front tells you when the camera is actively recording.
- The GoPro records in landscape by default, which is the right orientation for most situations — do not rotate the camera to portrait mode unless you have a specific reason.
- Video files save automatically to your microSD card; you can review them on the camera screen or transfer them to a computer using the USB cable.
- Battery life is typically 60 to 90 minutes of continuous recording, depending on resolution and frame rate — bring a spare battery or power bank for longer sessions.
How to record your first video
Press the red record button on the top of the camera to start recording. You will see a red dot appear on the front of the camera and a timer on the screen counting up. The camera is now capturing everything in front of the lens. Press the record button again to stop. That is the entire process — no menus to navigate, no settings to change.
The camera records in whatever mode is currently selected. Most GoPros ship set to standard video mode at 1080p resolution and 60 frames per second, which is fine for learning. You can change these settings later once you understand what each one does. For now, just press record and film.
The red light on the front of the camera is your visual confirmation that recording is happening. If you are not sure whether the camera is on, look for that light. The screen will also show a timer counting upward while you record.
Understanding the screen and basic navigation
The touchscreen on the back of your GoPro is how you see what the camera sees and change settings. When you first power on, you are in live view — the screen shows you what the lens is pointed at in real time. This is called the preview screen, and it is the safest place to start. You can frame your shot, check the lighting, and make sure nothing is blocking the lens.
Swipe left or right on the screen to move between different modes: video, photo, burst, and time-lapse. Swipe down from the top to see quick settings like resolution and frame rate. Swipe up from the bottom to see your recent recordings and photos. These swipes are the main way you navigate without getting lost in menus.
If you accidentally enter a menu you do not recognize, press the power button briefly to return to live view. The camera is designed so that one button press always gets you back to the main screen.
Choosing the right video resolution and frame rate
Resolution and frame rate are the two settings that matter most when you start recording. Resolution is how sharp the video looks — 1080p is standard definition, 2.7K is sharper, and 4K is the sharpest. Frame rate is how many individual pictures the camera takes per second; 60 frames per second (fps) is smooth and good for most situations, while 30 fps uses less battery and storage space.
For your first videos, stick with 1080p at 60 fps. This combination records clear video, uses a reasonable amount of battery, and does not fill your microSD card too quickly. Once you are comfortable with the camera, you can experiment with 2.7K or 4K, but understand that higher resolution means larger files and shorter battery life.
To change these settings, swipe down from the top of the screen. You will see icons for resolution and frame rate. Tap the resolution icon and select 1080p; tap the frame rate icon and select 60. These changes take effect when ready on your next recording.
Transferring videos to your computer
Your videos are saved to the microSD card inside the camera. To move them to a computer, connect the GoPro to your laptop or desktop using the USB-C cable. The camera will appear as a removable drive on your computer, just like a flash drive. Open the drive and navigate to the DCIM folder, then the 100GOPRO folder — your video files are there.
You can copy and paste the video files to any folder on your computer. Once they are copied, you can disconnect the camera. The files remain on the microSD card until you format the card inside the camera (which erases everything on it), so you do not lose anything by transferring.
If you want to watch videos on the camera itself, swipe up from the bottom of the screen to open the gallery. Tap any video to play it. Use the touchscreen to pause, rewind, or skip forward. This is useful for checking that your shot worked before you leave the location.
Protecting your camera from water and damage
Most GoPro models are waterproof without a case — they can handle splashes, rain, and brief submersion. However, if you plan to take the camera underwater or use it in heavy rain, check your specific model's depth rating (usually printed on the box or in the manual). GoPro Hero 11 and 12 models are waterproof to 33 feet; older models vary.
For everyday use, the camera is tougher than it looks. It has a rugged plastic body and a reinforced lens. Avoid dropping it on hard surfaces, and do not leave it in direct sunlight for long periods, as heat can damage the battery. If you are filming in dusty or sandy environments, rinse the camera with fresh water afterward to prevent sand from scratching the lens.
The lens has a protective glass cover that is replaceable if it gets scratched. If you notice the video looks cloudy or blurry, the lens cover may need cleaning — wipe it gently with a soft, dry cloth.
Troubleshooting common beginner problems
If the camera will not turn on, the battery is likely dead. Plug it in and wait at least 30 minutes before trying again. If the screen is black but the camera seems to be on, you may have accidentally entered a menu — press the power button to return to live view.
If you press record and nothing happens, check that a microSD card is inserted. The camera will not record without one, and it will not give you an error message — it will straightforward do nothing. If the card is in and the camera still will not record, the card may be full. Swipe up to see how much storage is left, or delete old videos to free space.
If your videos look blurry, the lens may be dirty or you may be holding the camera too close to your subject. Clean the lens with a soft cloth and try filming something at least a few feet away. If the video is still blurry, the autofocus may be struggling — tap the screen where you want the camera to focus, and it will lock onto that area.
Frequently Asked Questions
How long can I record on a single battery charge?
Most GoPro batteries last 60 to 90 minutes of continuous recording at standard settings (1080p, 60 fps). Cold temperatures reduce this time significantly — expect 30 to 45 minutes in freezing weather. Bring a spare battery or portable charger if you plan to film for longer than two hours.
What size microSD card do I need?
A 64 GB card holds roughly 90 minutes of 1080p video at 60 fps. A 128 GB card holds about three hours. For most beginners, 64 GB is enough for a day of filming; 128 GB gives you more breathing room. Avoid very cheap cards — they often fail or record slowly.
Can I use my GoPro underwater?
Yes, most GoPro models are waterproof to 33 feet without a case. Check your specific model's manual for the exact depth rating. Freshwater is fine; saltwater is okay too, but rinse the camera with fresh water when ready after use to prevent corrosion.
How do I delete videos from the camera?
Swipe up to open the gallery, tap and hold a video, and select delete. You can also delete all videos at once by going to Settings, then Format Card, but this erases everything on the card — use this only when you are sure you have backed up all your footage.
Why does my video look dark or washed out?
The GoPro's automatic exposure sometimes struggles in very bright or very dim light. Tap the screen to let the camera refocus on your subject, or move to a spot with more even lighting. If you are filming in bright sunlight, try positioning yourself so the sun is behind you rather than in front of you.