What the Hero 3 does and how to turn it on
The GoPro Hero 3 is a compact action camera that records video and still photos in high definition. It mounts to helmets, chest harnesses, or handheld poles, and runs on a rechargeable battery. To turn it on, press and hold the power button on the back of the camera for about two seconds until you see the LED lights flash and hear a beep.
The camera has three main buttons: power (back), mode (top), and shutter (front). The mode button cycles through recording video, taking photos, and burst mode. The shutter button starts and stops recording or captures a still image, depending on which mode you are in. A small LCD screen on the back shows you what the camera sees, battery life, and recording status.
Before you record anything, charge the battery fully using the USB cable that came with the camera. A full charge takes about three hours and gives you roughly 90 minutes of recording time at 1080p resolution, depending on the settings you choose.
Key Takeaways
- Press and hold the power button for two seconds to turn on the Hero 3, and use the mode button to switch between video, photo, and burst modes.
- The shutter button on the front starts and stops video recording or captures a still image.
- Insert a microSD card (Class 10 recommended) before recording, because the camera has no built-in storage.
- Record in 1080p at 30 frames per second for the best balance of quality and file size on most microSD cards.
- Always charge the battery fully before extended use, and keep a spare battery on hand for longer shooting days.
Installing the microSD card and choosing recording settings
The Hero 3 stores all video and photos on a microSD card, not in the camera itself. Open the small door on the side of the camera and slide a microSD card into the slot until it clicks. Use a Class 10 microSD card with at least 32 GB of storage; slower cards may cause the camera to drop frames or stop recording mid-shot.
Once the card is in, press the mode button to cycle to video mode. The LCD screen will show a red dot and a timer. Before you record, you can change the resolution and frame rate by accessing the camera's settings menu. Press the power button once (not holding it) to open the menu, then use the mode button to navigate and the shutter button to select. The most common settings are 1080p at 30 frames per second, which gives you sharp, smooth video without eating up storage space too quickly.
If you are recording in bright sunlight or very dark conditions, the Hero 3 has a field-of-view setting that you can adjust in the menu. Wide angle captures more of the scene and is best for action shots; medium and narrow angles are useful if you want to zoom in on a distant subject.
Recording video and taking photos
To record video, make sure the camera is in video mode (the LCD will show a red dot), then press the shutter button on the front. The red dot will blink and the timer will count up. Press the shutter button again to stop recording. The camera saves the file automatically to your microSD card.
To take a still photo, press the mode button until the LCD shows a camera icon instead of a red dot. Press the shutter button once to capture a single photo. If you want to take multiple photos in quick succession, press the mode button one more time to enter burst mode, then hold down the shutter button. The camera will fire off photos as fast as it can until you release the button.
The Hero 3 has no optical zoom, so moving the camera closer to your subject is the only way to frame a tighter shot. The camera also records audio through a small microphone on the front, so be aware of wind noise and background sound when you are filming outdoors.
Mounting the camera and protecting it from water
The Hero 3 comes with a waterproof housing that lets you submerge it up to 60 meters (about 200 feet). To use it, open the housing, slide the camera in, and snap the door shut. Make sure the rubber seal is clean and dry before closing, or water will leak inside.
The camera also comes with several mounts: a curved adhesive mount for helmets, a flat adhesive mount for smooth surfaces, and a standard tripod mount on the bottom. Attach the mount you need to the housing, then stick or screw it to your helmet, chest harness, or pole. Test the mount on the ground first before wearing it or mounting it on a vehicle.
Without the housing, the Hero 3 is splash-resistant but not waterproof. If you plan to use it near water or in rain, keep the housing on. If you are recording in very cold weather, remove the camera from the housing occasionally to let condensation evaporate, or the lens will fog up.
Transferring video and photos to your computer
To move your files off the camera, connect it to your computer using the USB cable. The microSD card will appear as a removable drive on your desktop or file explorer. Open the DCIM folder, then the 100GOPRO folder inside it. All your video files will be named with a GH prefix (like GH010001.MP4) and photos will have a GOPR prefix.
Copy the files to a folder on your computer, then eject the card safely before unplugging the camera. Do not pull the USB cable while files are transferring, or you may corrupt the card. If you want to edit your video, you can use free software like iMovie (Mac) or Windows Photos (Windows), or paid options like Adobe Premiere or Final Cut Pro.
After you have copied your files, you can format the microSD card in the camera to erase everything and prepare it for new recordings. Open the menu, find the Format Card option, and confirm. This is faster and safer than deleting files one by one.
Troubleshooting common problems
If the camera will not turn on, the battery may be dead. Plug it in to charge for at least 30 minutes, then try again. If the LED lights flash but the LCD screen stays black, try a hard reset by holding the power button for 10 seconds, then turning it back on.
If the camera stops recording in the middle of a shot, the microSD card may be full or too slow. Check how much space is left on the card in the menu, and consider upgrading to a faster Class 10 card if you are using an older or slower one. If video files are corrupted or will not play on your computer, the card may have failed. Try formatting it in the camera, or replace it with a new one.
If the LCD screen is dim or hard to read, you can adjust the brightness in the menu. If the camera is overheating (the LCD will show a thermometer icon), turn it off and let it cool for 15 minutes before recording again. This is normal in very hot weather or during long recording sessions.
Battery care and storage
The Hero 3 battery degrades over time, especially if you leave it fully charged for weeks or store it in hot conditions. If you plan to store the camera for more than a month, charge the battery to about 50 percent and keep it in a cool, dry place. Fully drain and recharge the battery once a month to keep it healthy.
Always carry a spare battery if you are filming for more than 90 minutes. Batteries are inexpensive and swap in and out in seconds. Keep spare batteries in a protective case to prevent short circuits, and never leave batteries in direct sunlight or in a hot car.
If the battery no longer holds a charge after a few hours of use, it has reached the end of its life and needs to be replaced. You can order replacement batteries from GoPro or from third-party retailers. Dispose of old batteries at an electronics recycling center, not in the trash.
Frequently Asked Questions
Can I use the Hero 3 underwater without the housing?
No. The camera itself is splash-resistant but not waterproof. You must use the waterproof housing if you plan to submerge it or use it in heavy rain. The housing is rated to 60 meters, which is deep enough for snorkeling and most recreational diving.
What microSD card should I buy?
Use a Class 10 microSD card with at least 32 GB of storage. Class 10 cards are fast enough to handle the Hero 3's video bitrate without dropping frames. Avoid very cheap or old cards, which may be slower or fail unexpectedly. SanDisk, Kingston, and Samsung are reliable brands.
How long does the battery last?
A full charge gives you roughly 90 minutes of recording at 1080p 30fps. Battery life varies depending on resolution, frame rate, and whether the LCD screen is on. Using lower resolutions or turning off the LCD will extend battery life by 20 to 30 minutes.
Can I edit video on the camera itself?
No. The Hero 3 records video only; it has no built-in editing tools. You must transfer files to a computer and use editing software like iMovie, Windows Photos, or Adobe Premiere to trim, cut, or add effects.
What should I do if the lens is foggy?
Remove the camera from the housing and let it sit in a warm, dry place for 15 to 30 minutes. Do not wipe the lens with your fingers, as this can scratch it. If condensation keeps forming, the housing seal may be damaged or the camera may have gotten wet inside. Stop using it and contact GoPro support.