Getting Your GoPro Hero 4 Ready to Film

The GoPro Hero 4 turns on by pressing the power button on the side of the camera for three seconds. You'll see the GoPro logo appear on the small front screen, and a beep will sound. Before you film anything, you need to insert a microSD card into the slot on the bottom of the camera—the camera won't record without one. A Class 10 microSD card rated for at least 60 Mbps write speed works best; slower cards may cause the camera to drop frames or stop recording mid-clip.

Charge the battery fully before your first use. The battery slides into the side of the camera below the power button. Plug the USB cable into the port on the bottom, and the battery will charge inside the camera. A full charge takes about two hours and gives you roughly 60 to 90 minutes of recording time, depending on resolution and frame rate. The front screen will show a battery icon filling up as it charges.

Mount the camera using the frame or housing that came in your box. The frame clips onto the camera body and has a standard tripod socket on the back. You can attach it to a helmet, chest strap, selfie stick, or tripod using the mounts included in your kit. Make sure the mount is tight before you start recording—a loose camera will shift during action and ruin your footage.

Key Takeaways

  • Insert a Class 10 microSD card and charge the battery fully before you film anything, or the camera will not record.
  • Press the power button for three seconds to turn the camera on, and press the shutter button (the large button on top) to start and stop recording.
  • The camera defaults to 1080p at 60 frames per second, which works well for most action footage and uses less storage than higher resolutions.
  • Connect the camera to your phone or computer using the GoPro app or USB cable to review footage and transfer files to your device.
  • The camera will overheat if you film in direct sunlight for more than 30 minutes without a break, so take pauses during long sessions.

Recording Video and Taking Photos

Press the large shutter button on top of the camera to start recording. The front screen will show a red dot and a timer counting up the seconds. Press the shutter button again to stop recording. Each time you press it, the camera saves a separate video file. If you want to record continuously, just press once and let it run—the camera will keep recording until the battery dies or the memory card fills up.

To take a still photo instead of video, press the power button while the camera is on. This opens the mode menu on the front screen. Use the up and down buttons on the back to scroll to the photo icon (a camera symbol), then press the shutter button. The camera will take one photo each time you press the shutter button. You can take photos while video is recording, but the camera will pause the video for a moment while it saves the photo.

The Hero 4 defaults to 1080p resolution at 60 frames per second, which is a good starting point. This setting balances video quality with file size and battery life. If you want sharper footage or slower motion, you can change the resolution and frame rate in the settings menu, but higher settings drain the battery faster and fill the memory card quicker.

Changing Settings and Modes

Access the settings menu by pressing the power button while the camera is on. The front screen will show icons for video, photo, and settings. Use the up and down buttons on the back to highlight the settings icon (a wrench symbol), then press the shutter button. You can now adjust resolution, frame rate, field of view, and other options.

The field of view setting controls how wide the camera sees. Wide (the default) captures the most area and is best for action footage. Medium and narrow fields of view zoom in slightly and are useful if you want to focus on something specific. Changing the field of view does not require you to move the camera—it just changes what the lens captures.

The frame rate setting controls how many images per second the camera records. 60 frames per second is standard and works for most situations. 30 frames per second uses less battery and storage but may look slightly less smooth. 120 frames per second records in slow motion but uses much more storage and drains the battery quickly. You can only use 120 fps at lower resolutions like 720p.

After you change a setting, press the shutter button to confirm and return to the main screen. The camera remembers your settings even after you turn it off, so you only need to change them once unless you want to try something different.

Connecting to Your Phone or Computer

read the GoPro app on your phone (available for iPhone and Android). Turn on the camera and press the power button to open the mode menu. Scroll to the settings icon and press the shutter button. Look for a WiFi option and turn it on. The camera will display a WiFi name and password on the front screen.

Open the GoPro app on your phone and select your camera from the list of available networks. Enter the password shown on the camera screen. Once connected, the app will show a live preview of what the camera sees. You can start and stop recording from your phone, change settings, and browse videos and photos stored on the memory card. This is useful if you want to see what the camera is recording without looking at the tiny front screen.

To transfer footage to your computer, connect the camera to your computer using the USB cable. The camera will appear as a removable drive. Open the DCIM folder and look for a folder named 100GOPRO (or a similar number). Your video files will be inside, named with numbers like GH010001.MP4. You can copy these files to your computer's hard drive or an external drive for storage and editing.

Avoiding Common Problems

The camera will shut off automatically if it gets too hot. This usually happens when you film in direct sunlight for 30 minutes or longer without a break. If the camera shuts down, remove it from the sun, let it cool for 10 to 15 minutes, and turn it back on. To prevent overheating, take breaks every 20 to 30 minutes during long filming sessions, or use a protective case with ventilation holes.

If the camera stops recording suddenly, the memory card is probably full. Check the front screen for a full card icon (a card with an X). You can delete old footage on the camera itself by pressing the power button, scrolling to the delete icon, and selecting files to remove. Or you can turn off the camera, remove the memory card, and insert a new one.

If the camera won't turn on, the battery may be dead. Plug it in and charge for at least 30 minutes before trying again. If it still won't turn on after charging, try holding the power button for 10 seconds instead of three—sometimes the camera needs a longer press to wake up.

If video looks blurry or shaky, make sure your mount is tight and the camera is not moving around. Also check that the lens is clean—wipe it gently with a soft cloth before filming. If footage is dark, you may be filming in low light. The Hero 4 does not perform well in dim conditions, so try moving to a brighter area or filming during daylight.

Caring for Your Camera

The Hero 4 is water-resistant when used with the waterproof housing, but the camera body itself is not waterproof. If you plan to use it near water, always keep it in the housing. Rinse the housing with fresh water after use in salt water or chlorine, and let it dry completely before opening it.

Store the camera in a cool, dry place when you are not using it. Remove the battery if you plan to store it for more than a few weeks, as batteries can drain slowly even when the camera is off. Keep the memory card in the camera or in a protective case to avoid damage or data loss.

Clean the lens regularly with a soft, dry cloth. Do not use paper towels or your shirt, as these can scratch the lens. If the lens gets wet, dry it gently before filming. A scratched or dirty lens will make your footage look hazy or blurry.

Frequently Asked Questions

How long does the battery last on a single charge?

A full battery charge gives you 60 to 90 minutes of recording time. The exact length depends on resolution, frame rate, and whether you are using WiFi. Higher resolutions and frame rates drain the battery faster. Turning off WiFi and the front screen also extends battery life.

Can I use any microSD card, or does it have to be a specific brand?

Any Class 10 microSD card rated for at least 60 Mbps write speed will work. You do not need an expensive brand-name card. Avoid very cheap cards, as they may be too slow and cause the camera to drop frames or stop recording unexpectedly.

What resolution should I use for slow-motion footage?

Use 720p resolution at 120 frames per second for slow motion. This is the highest frame rate the Hero 4 supports. If you want slow motion at higher resolutions, you will need a newer GoPro model. Remember that 120 fps uses a lot of storage, so bring extra memory cards if you plan to film a lot of slow-motion footage.

Why does my footage look dark even though it was bright outside?

The Hero 4 has a fixed exposure, meaning it cannot adjust automatically to very bright or very dark conditions. If you film in bright sunlight, the camera may underexpose the image to protect the highlights. Try adjusting the field of view or moving the camera slightly to change what the lens sees. In low light, the camera will always struggle—it performs best in daylight or well-lit indoor spaces.

How do I delete videos from the camera?

Press the power button to open the mode menu, scroll to the delete icon (a trash can symbol), and press the shutter button. Select the video or photo you want to delete and press the shutter button again to confirm. You can delete one file at a time or select multiple files to delete together. Deleted files cannot be recovered, so make sure you have transferred important footage to your computer first.