Getting Started With the Hero 3
The GoPro Hero 3 turns on by pressing the power button on the left side of the camera for two seconds. A blue light will flash, then stay on steadily once the camera is ready. The Hero 3 has three main buttons: power (left side), mode (top), and shutter (right side). The mode button cycles through recording video, taking photos, and burst mode. The shutter button starts and stops recording, or captures a still image depending on which mode you are in.
Before you film anything, insert a microSD card into the slot on the bottom of the camera. The Hero 3 works with cards up to 64 GB, though a Class 10 card rated for fast writes will give you the best performance. Power off the camera, slide the card in with the label facing toward the back of the camera, and push until it clicks. The camera will format the card the first time you use it, which erases anything already on the card.
The LCD screen on the back is small and mainly shows you recording status and battery level. You cannot navigate menus on this screen the way you would on a regular camera. Instead, the Hero 3 uses a companion app on your phone or tablet to change settings. read the GoPro App (free) from the Apple App Store or Google Play, turn on the camera's Wi-Fi by holding the power button for five seconds, and connect your phone to the camera's network. Once paired, you can adjust resolution, frame rate, and other options from your phone.
Key Takeaways
- Power on by pressing the left button for two seconds, and insert a microSD card into the bottom slot before recording anything.
- Use the mode button on top to switch between video, photo, and burst mode, then press the shutter button on the right to start recording or capture an image.
- read the free GoPro App to your phone to change settings like resolution and frame rate, since the camera's small screen does not have a menu system.
- Video records to the microSD card, and you transfer files to your computer by connecting the camera via USB cable or removing the card and using a card reader.
- The battery lasts roughly 60 to 90 minutes of continuous recording depending on resolution and frame rate, so charge it fully before a shoot.
Recording Video and Adjusting Resolution
To record video, press the mode button until the camera shows a video icon on the LCD screen (a small camera symbol). Press the shutter button to start recording. A red dot will appear on the screen and blink while the camera is capturing. Press shutter again to stop. The Hero 3 records in several resolutions: 1080p at 60 frames per second, 720p at 120 frames per second, and 480p at 240 frames per second. Higher resolution uses more battery and fills the card faster, but gives you sharper, more detailed footage.
To change resolution, open the GoPro App on your phone after connecting to the camera's Wi-Fi. Tap the settings icon (usually a gear symbol), scroll to video resolution, and select the option you want. The app will show you how long your microSD card can record at each setting. If you are filming action sports or fast movement, 720p at 120 fps lets you slow down the footage in editing and still see smooth motion. For general use, 1080p at 60 fps is a good balance between quality and file size.
The Hero 3 has a wide-angle lens fixed at about 170 degrees, which is why footage often looks curved or "fisheye." This is normal and intentional—the wide angle captures more of the scene around you. You cannot change the lens or zoom in and out. If you want a narrower field of view, you can crop the video during editing on your computer.
Taking Photos and Using Burst Mode
Press the mode button until the LCD shows a photo icon (a single-frame symbol). Press shutter to capture one still image. The camera saves it to the card and is ready for the next shot when ready. Photos are 12 megapixels, which is large enough to print at standard sizes or crop for social media.
Burst mode captures multiple photos in rapid succession with one button press. Press mode until you see a burst icon (multiple overlapping frames), then press shutter. The camera will take photos as fast as it can until you release the button or it reaches the burst limit. Burst mode is useful for action shots where you want to pick the best frame later, or for capturing a moment you cannot predict exactly. The downside is that burst mode uses a lot of card space quickly, so check your available storage before shooting.
Managing Battery Life and Charging
The Hero 3 has a built-in rechargeable battery that lasts roughly 60 to 90 minutes of continuous video recording. The actual time depends on resolution, frame rate, and Wi-Fi use. Recording at 1080p 60fps will drain the battery faster than 720p 60fps. Using Wi-Fi to control the camera from your phone also drains the battery more quickly than using the camera alone.
Charge the camera by connecting the USB cable to the port on the bottom. A full charge takes about two to three hours. A small LED on the camera shows charging status: red while charging, and blue when fully charged. If you plan to film for longer than 90 minutes, bring a second battery or a portable USB power bank. You cannot swap the battery yourself—the battery is sealed inside the camera.
To extend battery life during a shoot, turn off Wi-Fi if you are not using the app to control the camera. Turn off the camera between takes instead of leaving it on standby. Avoid recording in very cold weather, as cold temperatures reduce battery performance temporarily. The battery will recover its normal capacity once it warms up.
Transferring Video and Photos to Your Computer
Connect the Hero 3 to your computer using the USB cable that came with the camera. Plug the cable into the USB port on the bottom of the camera and into a USB port on your computer. The camera will appear as a removable drive or external hard drive on your desktop or file explorer. Open it and navigate to the DCIM folder, which contains all your videos and photos organized by date.
Drag and drop the files you want to your computer's hard drive or an external drive. Video files are large—a one-hour 1080p video can be 5 to 10 GB—so make sure you have enough space. Once the files are copied, you can eject the camera and disconnect it. The files remain on the microSD card until you format the card in the camera, which erases everything on it.
Alternatively, remove the microSD card from the camera and insert it into a card reader connected to your computer. This is often faster than transferring through the USB cable. Either method works; use whichever is more convenient for your setup.
Common Settings and What They Do
The GoPro App lets you adjust several settings that change how the camera records. Frame rate (measured in fps, or frames per second) controls how smooth motion looks. Higher frame rates like 120 fps capture more detail in fast action but create larger files. Lower frame rates like 30 fps use less space but may look choppy if there is a lot of movement.
Field of view on the Hero 3 is fixed, but some GoPro models let you choose between wide, medium, and narrow angles. The Hero 3 always records in wide angle. White balance adjusts color based on lighting conditions. Auto white balance works for most situations, but you can set it to specific lighting types (like underwater or tungsten) if colors look wrong. Protune is an advanced mode that gives you manual control over color, ISO, and sharpness. Leave it off unless you plan to edit the footage heavily in post-production.
The looping feature lets the camera record continuously and overwrite old footage when the card is full. This is useful if you want the camera to run all day and you only care about the most recent footage. Time-lapse captures one photo at set intervals (like every two seconds) and plays them back as a fast video. Time-lapse is great for showing sunsets, construction, or any slow change over time.
Troubleshooting Common Problems
If the camera will not turn on, the battery may be completely drained. Connect it to a charger and wait at least 15 minutes before trying again. If the screen shows "Card Error," the microSD card may not be fully inserted or may be corrupted. Power off the camera, remove the card, and reinsert it firmly until it clicks. If the error persists, try formatting the card in the camera (this erases everything on it). Go to settings in the GoPro App and look for a format or reset option.
If video looks blurry or out of focus, the lens may be dirty. Wipe it gently with a soft, dry cloth. The Hero 3 focuses at infinity, meaning everything far away is sharp but very close objects may be blurry. If you are filming something very close to the camera, move it back a few inches. If the Wi-Fi will not connect, restart both the camera and your phone. Make sure the camera's Wi-Fi is on (hold power for five seconds until you see a Wi-Fi icon), and that your phone is searching for the camera's network name.
If the battery drains very quickly, check that Wi-Fi is off if you are not using it. High resolution and high frame rates also drain the battery faster than lower settings. If you are filming in cold weather, the battery will recover normal performance once it warms up. If the camera overheats during extended recording, it will shut down automatically to protect itself. Let it cool for 15 to 20 minutes before using it again.
Frequently Asked Questions
Can I use the Hero 3 underwater?
Yes, the Hero 3 is waterproof to 40 meters (about 130 feet) without any additional housing. You can film in pools, at the beach, or while snorkeling. For deeper diving beyond 40 meters, you need a separate dive housing. Rinse the camera with fresh water after saltwater use to prevent corrosion.
How do I know how much space is left on my microSD card?
Open the GoPro App and look at the card status, which shows remaining space and estimated recording time at your current settings. You can also connect the camera to your computer and check the card's properties in file explorer. Most cards show available space when you open them as a removable drive.
What is the difference between photo and burst mode?
Photo mode takes one image per button press. Burst mode takes many photos rapidly while you hold the button down. Use photo mode for planned shots where you know exactly when to press. Use burst mode for unpredictable action where you want multiple chances to get the perfect frame.
Can I use any microSD card with the Hero 3?
The Hero 3 works with microSD cards up to 64 GB, but a Class 10 card rated for fast writes performs best. Slower cards may cause dropped frames or stuttering video. Check the card's packaging or specifications before buying. Avoid very old or cheap cards, as they often cannot keep up with the camera's recording speed.
How do I delete files from the camera?
Connect the camera to your computer via USB, open the DCIM folder, and delete files the same way you would delete any computer file. You can also format the entire card in the camera using the GoPro App settings, which erases everything. There is no way to delete individual files directly on the camera itself.