Turn on the camera and insert the battery and memory card first

The GoPro Hero 4 powers on with the button on the front of the camera. Before you press it, you need a charged battery in the battery compartment (on the bottom of the camera) and a microSD card in the card slot (also on the bottom, next to the battery). The camera will not record without both.

Charge the battery using the USB cable that came in the box. Plug the cable into the USB port on the side of the camera, or remove the battery and charge it in a separate charger if you have one. A full charge takes roughly two hours. The memory card should be a microSD or microSDHC card rated for video — SanDisk, Kingston, and Lexar cards work reliably with the Hero 4.

Once the battery is in and the card is seated, press the front button to turn the camera on. You will see the GoPro logo on the screen, then the main menu. The camera is now ready to record.

Key Takeaways

  • Insert a charged battery and microSD card into the bottom of the camera before powering on, or the camera will not record.
  • Press the front button to turn on the camera and see the main menu on the screen.
  • Press the shutter button (top of the camera) to start and stop recording in video mode.
  • The Hero 4 has two models — Silver and Black — and the Silver has a touchscreen while the Black does not.
  • Connect to the GoPro app on your phone to preview footage, change settings, and transfer files wirelessly.

Switch between video, photo, and burst modes using the mode button

The Hero 4 has three main recording modes: video, photo, and burst. You switch between them using the mode button on the back of the camera (the button with three horizontal lines). Press it once to cycle through the modes. The screen will show you which mode is active — a video camera icon for video mode, a still camera icon for photo mode, and a rapid-fire icon for burst mode.

In video mode, the camera records continuous footage. Press the shutter button (on top of the camera) to start recording, and press it again to stop. The screen shows a red dot while recording.

In photo mode, the camera takes a single still image each time you press the shutter button. In burst mode, the camera takes multiple photos in rapid succession — useful for action shots where you want to pick the best frame later.

Adjust resolution and frame rate in the settings menu

The Hero 4 records at different resolutions and frame rates depending on what you choose. Higher resolution means sharper, larger images; higher frame rate means smoother slow-motion playback. The trade-off is that higher settings use more battery and fill your memory card faster.

To change these settings, press the menu button (the three horizontal lines on the back) while the camera is on. Navigate to "Video Resolution" or "Frame Rate" using the arrow buttons, then press the shutter button to select. Common options include 1080p at 60 frames per second (good for general use), 2.7K at 30 frames per second (sharper but uses more space), and 720p at 120 frames per second (for slow-motion playback).

If you are new to the Hero 4, start with 1080p at 60 fps. It balances video quality, battery life, and file size. You can experiment with other settings once you understand how much space and power each one uses.

Connect to the GoPro app to preview and transfer footage

The GoPro app (available for iPhone and Android) lets you preview footage on your phone, change camera settings remotely, and transfer files wirelessly. To connect, turn on the camera, open the app, and tap "Connect a Camera." The app will search for your Hero 4 and ask you to confirm the connection on the camera screen.

Once connected, you can tap any video or photo in the app to watch it, and swipe left to delete files you do not want. To transfer a file to your phone, tap the file, then tap the read icon. Transfer speed depends on your WiFi signal — expect a few minutes for a typical video.

You can also use the app to change resolution, frame rate, and other settings without touching the camera itself. This is useful if the camera is mounted somewhere difficult to reach.

Mount the camera using the included accessories

The Hero 4 comes with a helmet mount, a curved adhesive mount, and a flat adhesive mount. Each one clips onto the camera using the standard GoPro mount on the bottom of the camera body.

For a helmet, use the helmet mount — it has a curved base that sits on the helmet and a strap that goes under the chin. For a car dashboard or flat surface, use the flat adhesive mount. For a curved surface like a surfboard or bike frame, use the curved adhesive mount. Clean the surface with a dry cloth before sticking the mount down, and let the adhesive set for an hour before using the camera.

If you want to mount the camera on a tripod or other equipment, you can buy a separate tripod adapter that screws onto the GoPro mount. These are inexpensive and widely available.

Understand the difference between the Hero 4 Silver and Black models

GoPro made two versions of the Hero 4: the Silver and the Black. The main difference is that the Silver has a touchscreen on the back, while the Black does not. The touchscreen makes it easier to navigate menus and preview footage without the app, but it uses more battery power.

Both models record at the same resolutions and frame rates, and both work with the same mounts and accessories. If you have the Silver, you can tap the screen to change modes and settings. If you have the Black, you use the buttons on the back instead. The button method is slower but works just as well once you learn where each button is.

Extend battery life and prevent overheating

The Hero 4 battery lasts roughly one to two hours of continuous recording, depending on resolution and frame rate. Higher settings drain the battery faster. If you are recording for longer than that, bring a second battery and swap it out when the first one dies.

The camera can also overheat if you record in hot weather or in direct sunlight for a long time. If the screen shows a thermometer icon, the camera is too hot. Stop recording, remove the battery, and let the camera cool down for 15 to 20 minutes in the shade. This is normal and does not mean the camera is broken.

To extend battery life, lower the resolution to 1080p, reduce the frame rate to 30 fps, and turn off WiFi when you are not using the app. These changes can add 30 minutes or more to a single charge.

Frequently Asked Questions

How do I know if my memory card is compatible with the Hero 4?

Use a microSD or microSDHC card rated for video recording. Check the card's packaging or the manufacturer's website to confirm it supports video. Avoid microSD cards slower than Class 10 — they may cause the camera to drop frames or stop recording unexpectedly. SanDisk Extreme, Kingston Canvas Go, and Lexar Professional cards are reliable choices.

Can I record while the camera is charging?

Yes. Plug the USB cable into the camera while it is on, and you can record while the battery charges. This is useful if you want to record for longer than the battery lasts. The camera will not overheat from charging while recording, but it will charge more slowly because the camera is drawing power at the same time.

What should I do if the camera stops recording on its own?

The camera usually stops recording because the battery died, the memory card is full, or the camera overheated. Check the screen for a low-battery icon (a lightning bolt), a full-card icon (a card with an X), or a thermometer icon. Charge the battery, delete old files, or let the camera cool down, then try recording again.

How do I delete files from the camera?

Press the menu button, navigate to "Delete," and choose "Last File" to delete the most recent recording, or "All Files" to erase everything on the card. You can also delete files one at a time using the GoPro app. Deleting is permanent — the camera does not have an undo button, so be sure you do not want the file before you delete it.

Can I use the Hero 4 underwater?

The Hero 4 is water-resistant but not waterproof on its own. It can handle splashes and brief submersion, but for underwater use you need the waterproof housing that comes with some Hero 4 packages. If you do not have the housing, you can buy it separately. The housing lets you record up to 131 feet underwater.