Turn on the camera and connect to Wi-Fi before your first recording

The GoPro Hero 5 powers on with the button on the right side of the camera. Hold it for three seconds until you see the GoPro logo and hear a beep. The first time you turn it on, the camera will ask you to choose a language and set the date and time — use the front and side buttons to navigate the menu, and press the shutter button (the large button on top) to confirm each choice.

Once the camera is on, you can connect it to Wi-Fi so you can view footage on your phone or transfer files to a computer later. Go to Preferences in the menu, select Connections, then Wi-Fi, and turn it on. The camera will broadcast its own network — open your phone's Wi-Fi settings, find the GoPro network, and connect. You will need the GoPro app (available free on iOS and Android) to view live footage on your phone, but Wi-Fi is not required just to record video.

Key Takeaways

  • Press and hold the power button for three seconds to turn on the camera, and use the shutter button on top to start and stop recording.
  • The Hero 5 records in 4K at 30 frames per second by default, but you can change resolution and frame rate in the Video menu if you want smaller file sizes or slower-motion footage.
  • Insert a microSD card (64 GB or larger recommended) before recording, because the camera has no built-in storage.
  • The camera automatically saves footage to the card — you do not need to manually save or export files like you would in editing software.
  • Battery life is roughly 60 to 90 minutes of continuous recording, depending on resolution and temperature.

Insert a memory card and check the battery before recording

The GoPro Hero 5 does not have any built-in storage. You must insert a microSD card to record anything. The card slot is on the right side of the camera, below the power button. Power off the camera, open the small door, and slide the card in until it clicks. The camera supports cards up to 256 GB, but a 64 GB card is practical for most users and costs less.

Check the battery before you leave to record. The battery icon appears in the top left corner of the screen — a full battery shows four bars. The Hero 5 battery lasts roughly 60 to 90 minutes of continuous recording in normal conditions, but cold weather and 4K recording both drain it faster. If you plan to record for more than an hour, bring a second battery or a portable charger. The battery charges inside the camera via the USB-C port on the bottom, or you can buy a separate charging dock.

Start recording in video mode and understand the default settings

Press the shutter button on top of the camera to start recording. A red dot will appear in the top left corner of the screen, and you will hear a beep. Press the shutter button again to stop. The footage is automatically saved to your microSD card — there is no separate save step.

By default, the Hero 5 records in 4K resolution at 30 frames per second (4K30). This produces high-quality video but creates large files — roughly 400 MB per minute. If you want smaller files or different motion effects, you can change these settings. Press the side button to open the menu, go to Video, and select Resolution or Frame Rate. Common alternatives are 1080p at 60 fps (for smooth slow-motion playback) or 1080p at 30 fps (for smaller files). The camera remembers your choice until you change it again.

Use photo and time-lapse modes for different types of shots

The Hero 5 has three main recording modes: Video, Photo, and Time-Lapse. Switch between them by pressing the mode button (the small button on the left side of the camera). In Photo mode, press the shutter button to take a single still image, or hold it down to take multiple photos in rapid succession. In Time-Lapse mode, the camera takes one photo at a set interval (you choose the interval in the menu) and combines them into a video that plays much faster than real time — useful for capturing a sunset or clouds moving across the sky.

Time-Lapse is helpful when you want to show change over a long period without recording hours of footage. Go to Time-Lapse in the menu and set the interval — common choices are 0.5 seconds (for fast action) to 2 seconds (for slower, more natural-looking motion). Press the shutter button to start, and the camera will take photos automatically until you press the shutter button again to stop.

Adjust exposure and white balance if your footage looks too dark or too blue

The Hero 5 automatically adjusts brightness and color, but sometimes the footage looks darker than what you saw in person, or it has a blue or orange tint. You can fix this by adjusting exposure and white balance in the menu. Press the side button, go to Preferences, then Camera, and look for Exposure and White Balance.

Exposure controls brightness — move the slider up to brighten the image or down to darken it. White Balance corrects color casts: choose Auto for most situations, Sunny for bright outdoor light, Cloudy for overcast days, or Underwater if you are recording in water (the Hero 5 is waterproof to 33 feet without a housing). These settings stay in place until you change them, so if you are recording in one location all day, adjust them once and leave them.

Transfer footage to your computer using USB or the GoPro app

Once you have recorded footage, you can view it on the camera's small screen, but you will want to transfer it to a computer for editing or storage. The easiest method is to connect the camera to your computer with a USB cable (the same USB-C cable that charges the battery). The camera will appear as a removable drive on your computer — open it and copy the DCIM folder to your computer. Video files are named with numbers like GH010001.MP4.

Alternatively, you can use the GoPro app on your phone. Turn on Wi-Fi on the camera, connect your phone to the camera's network, and open the app. You can preview footage and transfer files to your phone, then move them to your computer later. This method is slower than USB but useful if you want to share a clip right away.

Protect the lens and battery between uses

The Hero 5 comes with a lens cap — use it whenever you are not recording to prevent scratches and dust. Store the camera in a dry place, and remove the battery if you will not use the camera for more than a week. Lithium batteries lose charge over time, and storing a fully charged battery in a hot environment can shorten its lifespan. Keep the battery in a cool place, ideally at 50 to 70 percent charge.

If you plan to use the camera in water, the Hero 5 is waterproof to 33 feet without any housing. However, the microSD card slot and USB port are not sealed — do not submerge the camera if you have the door open. For depths beyond 33 feet, you will need the official GoPro housing, which is sold separately.

Frequently Asked Questions

What microSD card should I buy?

Buy a card rated for video recording — look for "V30" or "V60" on the label, which means it can write data fast enough for 4K video. SanDisk, Samsung, and Kingston all make reliable cards. A 64 GB card holds roughly 2.5 hours of 4K30 footage and costs between $15 and $30. Avoid very cheap cards, which may corrupt files or fail unexpectedly.

Why is my footage blurry or out of focus?

The Hero 5 focuses automatically on whatever is closest to the camera. If you are recording something far away, it may focus on something in the foreground instead. Try moving closer to your subject, or tap the screen on the camera to manually focus on a specific area. Also check that the lens is clean — wipe it gently with a soft cloth before recording.

How do I slow down my footage after recording?

You cannot slow down video on the camera itself — you will need editing software on your computer. Record at a higher frame rate (like 60 fps) if you know you want slow-motion footage. Footage recorded at 60 fps can be played back at half speed in most editing software and will look smooth. Slowing down footage recorded at 30 fps will look choppy.

Can I record while the camera is charging?

Yes, the Hero 5 can record while plugged into a USB charger or power bank. This is useful if you want to record for longer than the battery lasts. Connect the camera to a portable battery pack, and it will charge while you record.

What should I do if the camera gets wet inside?

If water gets inside the camera, power it off when ready and do not try to charge it. Remove the battery and microSD card, and let the camera dry in a warm, dry place for at least 48 hours. Do not use heat or a hair dryer — air drying is safest. Once it is completely dry, try powering it on. If it does not work, the camera may need professional repair.