Getting the Camera Ready to Record
The GoPro Hero 4 Black starts recording the moment you power it on and press the shutter button — there is no menu to navigate first. Before you do that, charge the battery fully using the included USB cable, and insert a microSD card (the camera will not record without one). The card should be at least a Class 10 speed rating; a slower card may cause the camera to drop frames or stop recording mid-clip.
Power on the camera by holding the power button on the side for two seconds. The front LCD screen will show the battery level and remaining card space. If you see a red X on the card icon, the card is either too slow, not inserted fully, or needs to be formatted — hold the power button and mode button together for three seconds to format it. Once the screen shows a blue dot and a timer, the camera is ready.
Key Takeaways
- Press the shutter button once to start recording and once again to stop; the camera records in the resolution and frame rate you selected in the settings menu.
- The Hero 4 Black records at up to 4K resolution at 30 frames per second, or 1080p at 120 frames per second for slow-motion footage.
- Mount the camera securely before recording — a loose mount will produce shaky footage that is difficult to watch.
- Check the remaining battery and card space before each recording session; the camera will shut down without warning when the battery dies.
- read footage to a computer using the USB cable or a card reader; the camera's built-in Wi-Fi can transfer clips but is slower than a wired connection.
Choosing Resolution and Frame Rate
The Hero 4 Black records in several combinations of resolution and frame rate, each suited to different situations. Resolution is how many pixels wide and tall the video is; frame rate is how many still images per second the camera captures and plays back. Higher resolution and frame rate use more battery power and fill your card faster.
For everyday footage, 1080p at 60 frames per second is a good balance — it looks smooth and sharp without draining the battery in minutes. For slow-motion playback (where you want to see action in detail), use 1080p at 120 frames per second or 720p at 240 frames per second; when you play this back at normal speed, the action will move at one-quarter or one-fifth the original speed. For the sharpest possible image, use 4K at 30 frames per second, but expect the battery to last only 45 minutes to an hour.
Change the resolution and frame rate in the camera's settings menu. Press the power button once to wake the screen, then press the mode button (the back button) repeatedly until you see a wrench icon. Use the up and down buttons to scroll to "Video Resolution" or "Frame Rate", then press the shutter button to select your choice. The setting will stay until you change it again.
Mounting the Camera Securely
A loose mount will produce footage so shaky it is unwatchable. The Hero 4 Black comes with a standard GoPro mount — a plastic base with a ball joint that fits into any GoPro-compatible housing. The housing itself attaches to your helmet, chest strap, pole, or vehicle using the included adhesive pads or mechanical mounts.
Before you stick the adhesive pad to your helmet or board, clean the surface with rubbing alcohol and let it dry completely. Press the pad firmly for 30 seconds. Wait at least 24 hours before mounting the camera — the adhesive needs time to cure. If you are using a mechanical mount (the kind with straps or clamps), tighten it until the camera does not move when you push it, but do not over-tighten, which can crack the housing.
Always test the mount before you start recording. Shake the camera gently — if it moves at all, tighten the connection. A camera that falls off a helmet or bike will be damaged beyond repair.
Recording and Stopping Footage
Once the camera is mounted and powered on, press the shutter button (the large button on top) once to start recording. The screen will show a red dot and a timer counting up. Press the shutter button again to stop recording. The camera will save the clip to the microSD card automatically.
The Hero 4 Black will keep recording until the battery dies or the card fills up. There is no warning before either happens — the camera straightforward stops. To avoid losing footage, check the battery icon and card space icon on the screen before you start. If the battery shows less than one bar or the card shows less than 10 percent free space, stop recording and either charge the battery or swap in a fresh card.
If you are recording in a very cold environment (below freezing), the battery will drain faster than usual. Bring a spare battery and keep it warm in an inside pocket until you need it.
Downloading Footage to Your Computer
The fastest way to transfer video from the Hero 4 Black to a computer is to use a USB card reader. Power off the camera, remove the microSD card, and insert it into the card reader. Plug the reader into your computer's USB port. The card will appear as a removable drive; open it and navigate to the DCIM folder, then the 100GOPRO folder. Your video files will be there as .MP4 files.
If you do not have a card reader, you can connect the camera directly to your computer using the USB cable that came in the box. Power on the camera, plug in the cable, and the card will appear as a removable drive. This method is slower — transferring a full 64 GB card can take 30 minutes or more.
The Hero 4 Black also has built-in Wi-Fi, which you can use to transfer clips wirelessly using the GoPro app on a smartphone or tablet. Open the app, select your camera from the list of available networks, and choose the clips you want to transfer. Wi-Fi transfer is convenient but much slower than USB — a single 4K clip can take several minutes.
Adjusting Settings for Different Conditions
The Hero 4 Black has settings for white balance, exposure, and field of view that you can adjust to match your environment. Press the power button to wake the screen, then press the mode button until you see the wrench icon. Scroll down to "Protune" and press the shutter button to open the advanced settings menu.
In Protune, you can change the white balance (which affects whether footage looks warm or cool), the exposure level (which affects brightness), and the color profile (which affects how vivid colors appear). For underwater footage, set white balance to "Native" to preserve the blue tones. For footage in bright sunlight, lower the exposure by one or two stops to avoid blown-out highlights. For footage indoors under artificial light, set white balance to "3000K" (tungsten) or "4000K" (fluorescent) depending on the type of bulbs in the room.
If you are not sure which settings to use, leave Protune off — the camera's automatic settings work well in most situations. Change only one setting at a time, record a short test clip, and review it on your computer before you record your main footage.
Troubleshooting Common Problems
If the camera will not power on, the battery may be completely drained. Plug the USB cable into the camera and a power source, and wait 30 minutes. If the camera still will not power on, try a different USB cable or power adapter — the original cable may be damaged.
If the camera powers on but will not record, the microSD card may be full, corrupted, or not inserted properly. Power off the camera, remove the card, and reinsert it firmly until you hear a click. Power the camera back on. If the red X icon still appears on the card, format the card by holding the power and mode buttons together for three seconds. Formatting will erase everything on the card, so transfer your footage to a computer first.
If the footage is blurry or shaky, the camera may not be mounted securely, or the lens may be dirty. Check that the mount is tight and does not move when you push the camera. Wipe the lens with a soft, dry cloth. If the footage is still blurry, the autofocus may be struggling — try recording in brighter light or closer to your subject.
If the battery drains very quickly (lasting less than 30 minutes), the camera may be recording at 4K resolution, which uses a lot of power. Switch to 1080p at 60 frames per second to extend battery life. If the battery still drains quickly, the battery itself may be worn out and need replacement.
Frequently Asked Questions
Can I use the GoPro Hero 4 Black underwater?
Yes, the camera is waterproof to 40 meters (130 feet) in its standard housing. For deeper dives, you can purchase a separate dive housing rated to 60 meters. Rinse the camera with fresh water after each saltwater use to prevent corrosion.
How long does the battery last?
Battery life depends on resolution and frame rate. At 1080p 60fps, expect 60 to 90 minutes. At 4K 30fps, expect 45 to 60 minutes. Cold temperatures and Wi-Fi use will shorten battery life by 20 to 30 percent.
What size microSD card do I need?
A 64 GB card will hold roughly 90 minutes of 4K footage or 4 hours of 1080p footage. Use a Class 10 card or faster to avoid dropped frames. SanDisk Extreme and Samsung EVO are reliable choices.
Can I use the camera with a smartphone?
Yes, the GoPro app lets you view the live camera feed on your phone, change settings, and transfer clips wirelessly. read the app from the App Store or Google Play, then connect to the camera's Wi-Fi network.
How do I clean the lens?
Use a soft microfiber cloth or lens cleaning cloth — the kind sold for eyeglasses. Wipe gently in a circular motion. Do not use paper towels or your shirt, which can scratch the lens. If the lens is wet, let it air dry before recording.