Getting Your GoPro Hero 4 Silver Ready to Record

The GoPro Hero 4 Silver is ready to record video and photos within minutes of unboxing. Start by inserting the battery into the slot on the camera's side—it slides in with the contacts facing toward the back of the camera. Next, insert a microSD card (the camera supports cards up to 128 GB) into the card slot on the opposite side. Power on the camera by pressing the power button on top for two seconds until you see the GoPro logo appear on the screen.

When you turn on the camera for the first time, it will ask you to select your language and set the date and time. Use the side buttons to navigate the menu: the back button (with the curved arrow) moves left, and the front button (with the play symbol) moves right. Press the shutter button (the large button on top) to confirm your selection. Once the date and time are set, your camera is ready to record.

Before your first recording session, charge the battery fully using the included USB cable and power adapter. A full charge takes roughly two hours and gives you about 90 minutes of recording time at 1080p resolution, though this varies depending on the resolution and frame rate you choose.

Key Takeaways

  • Insert the battery and microSD card, then power on the camera and set the date and time before recording.
  • Press the shutter button once to start recording and once again to stop—the red light on the camera indicates recording is active.
  • Use the back and front buttons on the side to navigate menus, and the shutter button to confirm selections.
  • The Hero 4 Silver has a built-in touchscreen that lets you preview footage and change settings without connecting to a computer.
  • Video files are saved to the microSD card and can be transferred to a computer via USB cable or a memory card reader.

Starting and Stopping a Recording

Recording video is the simplest function on the Hero 4 Silver. Press the shutter button (the large red button on top of the camera) once to begin recording. You will see a red circle appear in the top-left corner of the screen and hear a beeping sound. The camera is now capturing video to your microSD card.

To stop recording, press the shutter button again. The red circle will disappear, and the beeping will stop. Each time you press the shutter button, the camera creates a new video file. If you record for more than 4 GB in a single session, the camera automatically splits the file into multiple clips—this is normal and does not affect playback.

The Hero 4 Silver records in several resolution and frame rate combinations. The default setting is 1080p at 60 frames per second, which works well for most situations. If you want to change the resolution or frame rate, press the back button to open the menu, navigate to Camera Settings, and select Resolution. The higher the resolution, the larger the file size and the less recording time your microSD card will hold.

Taking Photos with the Hero 4 Silver

The Hero 4 Silver can take still photos in addition to video. To switch from video mode to photo mode, press the back button to open the menu, then navigate to the camera icon and select Photo. The screen will change to show a still image preview instead of a video preview.

Once you are in photo mode, press the shutter button to take a single photo. The camera will beep and the screen will briefly flash white. You can also use burst mode to take multiple photos in rapid succession—press and hold the shutter button for as long as you want to capture photos. Burst mode is useful for action shots where you want to pick the best frame later.

Photos are saved to the same microSD card as your video files and can be viewed on the camera's touchscreen or transferred to a computer alongside your video footage.

Using the Touchscreen to Preview and Navigate

The Hero 4 Silver has a 1.5-inch touchscreen on the back of the camera. This screen shows a live preview of what the camera is about to record, and it also lets you navigate menus and review footage without connecting to a computer. The screen is small but responsive and works even when you are wearing gloves in cold weather.

To open the main menu, press the back button. You will see icons for Camera Settings, Playback, and Wireless. Swipe left or right on the touchscreen to move between these sections, or use the side buttons to navigate. Press the shutter button to select an option. The menu system takes a few minutes to learn, but it becomes intuitive once you understand that the side buttons move through options and the shutter button confirms your choice.

To review footage you have already recorded, press the back button and select the Playback icon (it looks like a play symbol). Swipe left or right on the touchscreen to move between clips, and press the shutter button to play a video. You can also delete unwanted files from this screen by pressing the back button while a file is selected and choosing Delete.

Transferring Video and Photos to Your Computer

The Hero 4 Silver stores all video and photo files on the microSD card. To transfer these files to a computer, you have two options: connect the camera directly to your computer using the included USB cable, or remove the microSD card and insert it into a memory card reader connected to your computer.

If you use the USB cable, plug it into the USB port on the side of the camera and connect the other end to your computer. The camera will appear as a removable drive on your computer's file system. Open the DCIM folder, then the 100GOPRO folder inside it. All your video and photo files will be there. You can copy them to your computer's hard drive or an external storage device.

If you use a memory card reader, remove the microSD card from the camera by gently pushing it in until it clicks and then pulling it out. Insert the card into the memory card reader, connect the reader to your computer, and follow the same folder path (DCIM > 100GOPRO) to find your files. This method is faster than using the USB cable and does not drain the camera's battery.

Adjusting Basic Camera Settings

The Hero 4 Silver has several settings you can adjust to match your recording situation. To access these settings, press the back button to open the menu and select Camera Settings. The most common adjustments are Resolution, Frame Rate, and Field of View.

Resolution determines the size and quality of your video files. The Hero 4 Silver can record at 4K (3840 × 2160), 2.7K, 1440p, 1080p, 720p, and WVGA. Higher resolutions create larger files and use more battery power, but they give you more detail in your footage. For most situations, 1080p at 60 frames per second is a good balance between quality and file size.

Frame Rate controls how many individual images the camera captures per second. Common options are 24, 30, 48, and 60 frames per second. Higher frame rates create smoother slow-motion effects when you play the video back at normal speed, but they also create larger files. A frame rate of 60 fps is good for action footage, while 24 or 30 fps works well for general recording.

Field of View controls how wide or narrow the camera's lens appears. Wide field of view captures more of the scene around you, while narrow field of view zooms in on the center of the frame. The default is Wide, which is appropriate for most action recording. You can change this in Camera Settings if you want a different perspective.

Powering Off and Extending Battery Life

To power off the camera, press the power button on top for two seconds until the screen goes black. The camera will shut down completely. If you do not use the camera for several minutes, it will power off automatically to save battery—you can adjust this auto-off timer in Camera Settings under Power.

Battery life depends on what you are recording and which settings you are using. Recording at 4K resolution drains the battery faster than recording at 1080p. Using the touchscreen also drains the battery more quickly than using the camera without looking at the screen. To extend battery life, lower the resolution, reduce the frame rate, and turn off the touchscreen when you do not need to see a preview.

Always carry a spare battery if you plan to record for more than 90 minutes in a single session. Batteries are inexpensive and charge quickly, and having a backup ensures you do not miss important footage.

Frequently Asked Questions

What microSD card should I use with the Hero 4 Silver?

Use a microSD card rated for high-speed video recording, such as a SanDisk Extreme or Kingston Canvas Go. The camera supports cards up to 128 GB, but a 64 GB card is usually sufficient for most recording sessions. Avoid cheap or old cards, as they may not write data fast enough and can cause the camera to drop frames or stop recording unexpectedly.

How long does a fully charged battery last?

A fully charged battery lasts approximately 90 minutes of continuous recording at 1080p resolution and 60 frames per second. Recording at higher resolutions, using the touchscreen frequently, or recording in cold weather will reduce battery life. Carrying a spare battery is the most practical way to extend your recording time.

Can I use the Hero 4 Silver underwater?

The Hero 4 Silver is waterproof to 40 meters (130 feet) without any additional housing. If you want to record deeper than 40 meters, you will need to purchase the optional dive housing. Always rinse the camera with fresh water after using it in saltwater to prevent corrosion.

How do I delete files from the camera?

Press the back button to open the menu and select Playback. Swipe to the video or photo you want to delete, then press the back button again and select Delete. The file will be removed from the microSD card when ready. You can also delete files from your computer after transferring them to your hard drive.

What should I do if the camera stops recording unexpectedly?

Unexpected stops are usually caused by a slow microSD card, a nearly full card, or a low battery. Check that your microSD card is rated for high-speed video, that it has at least 1 GB of free space, and that the battery is charged. If the problem continues, try formatting the microSD card in the camera (this erases all files on the card, so transfer them to your computer first).