Power On and Basic Setup

The GoPro Hero 3 turns on with a single button press on the back of the camera, just above the LCD screen. Hold it for two seconds until you see the GoPro logo appear on the screen and hear a startup sound. The camera will take about five seconds to fully boot up and show you the main menu.

When you first power on the camera, you may see a setup screen asking you to select your language and time zone. Use the side buttons to navigate: the button on the left side moves you backward through options, and the button on the right side moves you forward. Press the back button (the one on the back near the power button) to confirm your selection. Once you finish setup, the camera remembers these settings and skips this screen on future startups.

Check the battery indicator in the top left corner of the screen. A full battery shows four bars. If you see only one bar, charge the camera before recording. The battery door is on the bottom of the camera—slide it open, insert the battery with the contacts facing toward the camera body, and close the door until it clicks.

Key Takeaways

  • Press and hold the back button for two seconds to power on; the camera takes about five seconds to fully start.
  • Navigate menus using the left and right side buttons, and press the back button to confirm selections.
  • Check the battery indicator before recording—one bar means you should charge before using the camera.
  • Switch between recording modes (Video, Photo, Burst) using the mode button on the left side of the camera.
  • Press the red record button on top to start and stop recording; the screen shows a red dot and timer while recording.

Choosing Your Recording Mode

The Hero 3 has three main recording modes: Video, Photo, and Burst. You switch between them using the mode button on the left side of the camera. Each press cycles to the next mode. The screen displays which mode you are in at the top—look for a video camera icon for Video mode, a still camera icon for Photo mode, or a rapid-fire icon for Burst mode.

Video mode is what you use for continuous recording. This is the default mode when you power on the camera. Photo mode takes a single still image each time you press the record button. Burst mode takes multiple photos in rapid succession—useful if you are shooting action and want to pick the sharpest frame later. Most beginners start with Video mode.

Recording Your First Video

Once you have selected Video mode, point the camera at what you want to record. The Hero 3 has a wide-angle lens, so it captures a much larger area than you might expect—test it by looking at the screen before you press record. The LCD screen on the back shows you exactly what the camera sees.

Press the red record button on top of the camera to start recording. You will see a red dot appear in the top left corner of the screen, and a timer will count up showing how long you have been recording. The camera records continuously until you press the record button again to stop. There is no limit to how long you can record except the size of your memory card—a 32 GB card typically holds about two hours of video at the Hero 3's highest quality setting.

While recording, avoid touching the camera body or the LCD screen, as the microphone picks up vibrations and button presses as noise. If you are holding the camera in your hand, try to keep your movements smooth and steady. The camera has image stabilization built in, so minor shaking is reduced automatically.

Adjusting Settings Before You Record

The Hero 3 lets you change resolution, frame rate, and other settings before you record. Press the back button to open the main menu, then use the side buttons to navigate to "Settings." From there you can adjust video resolution (1080p, 720p, or lower), frame rate (60 fps, 30 fps, or 24 fps), and field of view (wide, medium, or narrow).

For most situations, 1080p at 30 fps is a good starting point—it gives you clear video without using excessive memory card space. If you are recording fast action like skiing or mountain biking, 60 fps gives you smoother slow-motion playback. Lower resolutions like 720p use less memory and are useful if you plan to record for many hours without changing the memory card.

You can also turn on or off the onscreen display, which shows the timer, battery level, and other information while recording. Some people prefer to turn this off so it does not distract from the footage. To change this, go to Settings and look for "Display" or "Onscreen Display."

Viewing and Deleting Videos

To watch what you just recorded, press the back button to open the menu and select "Playback." Use the side buttons to scroll through your videos and photos. Press the back button again to play the selected video. While a video is playing, you can press the left side button to rewind or the right side button to fast-forward.

If you want to delete a video, select it in Playback mode and press the back button. A menu will appear asking you to confirm the deletion. Press the right side button to select "Delete" and then press the back button to confirm. Deleted videos cannot be recovered, so only delete videos you are certain you do not want.

Connecting to Your Computer

To transfer videos from your Hero 3 to a computer, connect the camera to your computer using the USB cable that came with the camera. Plug the small end into the USB port on the side of the camera (under a rubber cover) and the larger end into your computer. The camera will appear as a removable drive on your computer, and you can drag and drop video files to your hard drive just like moving any other file.

Video files are stored in a folder called "DCIM" on the camera. Inside that folder, you will find a subfolder with a name like "100GOPRO." Your video files are inside that subfolder. Copy the entire subfolder to your computer to preserve the folder structure, or copy individual video files if you only want certain ones.

After you have copied all your videos, you can format the memory card to erase everything and prepare it for new recordings. Go to Settings, select "Format," and confirm. Formatting erases all files on the card, so make sure you have copied everything you want to keep first.

Troubleshooting Common Issues

If the camera will not turn on, the battery may be dead. Plug the camera into a power outlet using the USB cable for at least 30 minutes, then try powering on again. If the screen is black but you hear the startup sound, the LCD screen may have gone to sleep—press any button to wake it up.

If video is not recording even though you pressed the record button, check that the memory card is inserted correctly. The card should slide in until you hear a click. If the card is not fully inserted, the camera will not record. Also check that you have enough free space on the card—if the card is full, delete old videos or insert a new card.

If the video looks blurry or out of focus, the lens may be dirty. Wipe the front lens gently with a soft, dry cloth. Do not use water or cleaning solutions, as these can damage the lens coating. If the video is very dark, you may be in a low-light situation—the Hero 3 does not perform well in dim light, so try moving to a brighter location or recording during daytime.

Frequently Asked Questions

How long does the battery last on a single charge?

Battery life depends on what you are recording and which settings you use. At 1080p resolution, you can typically record for about 90 minutes on a full charge. Using lower resolution or turning off the LCD screen extends battery life. Recording in cold weather reduces battery life significantly.

What memory card should I use with the Hero 3?

The Hero 3 uses a microSD card. GoPro recommends a Class 10 card with at least 32 GB of storage. Faster cards (marked U3 or V30) are better for recording at high resolution and frame rates. A 32 GB card holds roughly two hours of 1080p video at 30 fps.

Can I use the Hero 3 underwater?

The Hero 3 is waterproof up to 40 meters (130 feet) without any additional housing. If you want to go deeper, you need to purchase the optional dive housing. Always check that the battery door and USB port cover are fully closed before submerging the camera.

How do I turn off the beeping sounds?

Go to Settings and look for "Beep" or "Sound." You can turn off all beeping, or set it to a lower volume. Some users prefer to mute the camera entirely when recording in quiet environments where the beep might be picked up by the microphone.

Why is my video file so large?

Video files are large because they contain a lot of data. A one-minute video at 1080p resolution takes up roughly 150 to 200 MB of space. If file size is a concern, record at 720p resolution instead, which uses about half the space while still providing good quality for most uses.