Getting Your GoPro Hero 4 Ready to Record

The GoPro Hero 4 turns on by pressing the power button on the right side of the camera for two seconds. The camera will beep and the LED light on the back will flash white, then blue. Before you record anything, you need to insert a microSD card into the slot on the bottom of the camera — the Hero 4 will not save video without one. A Class 10 or UHS-3 card works best; slower cards may cause the video to stutter or stop recording mid-clip.

Once the card is in, connect the camera to power using the USB cable that came in the box. The first time you turn it on, the camera will ask you to set the date and time. Use the side buttons to navigate the menu: the top button moves up, the bottom button moves down, and the front button selects. This step matters because your video files will be named and sorted by the date and time you set here.

The Hero 4 comes in two versions — Black and Silver — and they have slightly different menu layouts. Both use the same basic controls, but the Black model records at higher frame rates and has more resolution options. Check which version you have by looking at the label on the back of the camera.

Key Takeaways

  • Insert a microSD card before recording, and use a Class 10 or faster card to avoid video stuttering or dropped frames.
  • Press the power button for two seconds to turn the camera on, and set the correct date and time on first startup.
  • Press the front button once to start recording and once again to stop; the red LED on the front will blink while recording.
  • Change video resolution and frame rate in the Settings menu before you start filming, because you cannot change these mid-recording.
  • Connect to the GoPro app on your phone to preview footage, change settings remotely, and transfer video to your device without a computer.

Recording Video and Taking Photos

To record video, press the front button on the camera once. The red LED on the front will blink steadily, and you will hear a beep. Press the front button again to stop recording. The camera saves each clip as a separate file, so if you record for 30 seconds, stop, and record again for 20 seconds, you will have two files instead of one 50-second file.

To take a still photo, hold down the front button for two seconds. The camera will beep twice and the LED will flash. The photo is saved when ready. You can also switch the camera to Photo mode by pressing the top and bottom buttons together, then pressing the front button to take individual photos.

The Hero 4 records in a wide field of view by default, which is good for action footage but can make distant objects look small. You can change the field of view in the Settings menu — options include Wide, Medium, and Narrow. Narrow mode zooms in and is useful if you are filming something far away, but it uses more battery power.

Changing Video Resolution and Frame Rate

Video resolution and frame rate are set in the Settings menu, and you must change them before you start recording — you cannot switch mid-clip. Press the top and bottom buttons together to open the menu, then use the side buttons to navigate to Settings. The options depend on which Hero 4 model you have.

The Black model offers 4K at 30 frames per second, 2.7K at 60 frames per second, and 1080p at 120 frames per second. The Silver model maxes out at 4K at 15 frames per second and 1080p at 60 frames per second. Higher resolution and higher frame rates use more battery and fill your memory card faster, so choose based on what you are filming. For slow-motion footage, use 120 frames per second at 1080p; for general action, 1080p at 60 frames per second is standard.

After you change the resolution or frame rate, the camera will return to the main screen. The setting stays in place until you change it again, so if you switch to 4K, every clip you record will be 4K until you go back to Settings and pick something else.

Using the GoPro App to Control and Preview

read the GoPro app on your phone from the Apple App Store or Google Play. Open the app and turn on the camera's Wi-Fi by pressing the top and bottom buttons together, then navigating to Wireless. Select Wi-Fi and the camera will display a network name and password on its screen. On your phone, go to Settings, find the Wi-Fi network that matches the camera's name, and enter the password shown on the camera screen.

Once connected, open the GoPro app and you will see a live preview of what the camera sees. You can start and stop recording from the app, change resolution and frame rate, and adjust field of view without touching the camera itself. This is useful if the camera is mounted somewhere you cannot reach, like on a helmet or a pole.

The app also lets you browse video and photos stored on the camera's memory card. You can watch clips, delete files, and transfer them to your phone. Transferring large 4K files over Wi-Fi is slow, so if you need video quickly, connect the camera to your computer with the USB cable instead.

Charging and Battery Life

The Hero 4 has a built-in rechargeable battery. Charge it by connecting the USB cable to the port on the bottom of the camera and plugging the other end into a wall outlet or computer. A full charge takes about two hours. The LED on the back will turn red while charging and turn off when the battery is full.

Battery life depends on what you are recording. At 1080p and 60 frames per second, you will get about two hours of recording time on a full charge. At 4K, battery life drops to about one hour. Recording in cold weather drains the battery faster. If you plan to film for longer than two hours, bring a second battery or a portable charger.

The camera will shut off automatically if the battery gets too low. You will hear a warning beep and see a low-battery icon on the screen before it powers down, so you have time to stop recording and save your work.

Mounting and Protecting Your Camera

The Hero 4 comes with a standard mount on the back that fits GoPro's full line of mounts — helmet straps, chest harnesses, suction cups, and adhesive pads. To attach a mount, slide the camera into the mount until you hear a click. To remove it, press the release button on the back of the mount and pull the camera straight out.

The camera is waterproof to 40 meters (about 130 feet) without a case, so you can take it swimming or snorkeling. For deeper water or rough conditions, GoPro sells a protective housing that extends waterproofing to 60 meters. The housing also protects the camera from dust and impact.

Always check that the USB port cover on the bottom is closed before you take the camera near water. If water gets inside, it will damage the battery and the circuit board. After using the camera in salt water, rinse it with fresh water and let it dry completely before charging.

Transferring Video to Your Computer

Connect the camera to your computer using the USB cable. Your computer will recognize the camera as an external drive. Open the drive and navigate to the DCIM folder, then the 100GOPRO folder. All your video and photo files are stored here. You can copy them to your computer's hard drive, an external drive, or cloud storage.

Video files from the Hero 4 are in MP4 format, which works on Windows, Mac, and most video editing software. If you are editing on a Mac, you may need to convert 4K files to a different format depending on which editing program you use. Most modern editing software handles MP4 files without conversion.

After you copy the files, you can delete them from the camera's memory card to free up space. Press the top and bottom buttons together to open the menu, navigate to Delete, and choose Delete All to erase everything, or Delete Last to erase only the most recent clip.

Troubleshooting Common Issues

If the camera will not turn on, the battery may be dead. Connect it to power and wait 30 minutes before trying again. If it still will not turn on, try a different USB cable — the original cable may be damaged.

If video is stuttering or stopping mid-recording, your memory card is too slow. Replace it with a Class 10 or UHS-3 card. Slow cards cannot write data fast enough to keep up with 4K or high frame rate recording.

If the camera is overheating, stop recording and let it cool down for 10 minutes. The Hero 4 will shut itself off if the internal temperature gets too high. This happens most often when recording 4K in hot weather or in direct sunlight. Switch to a lower resolution or take breaks between clips.

If the Wi-Fi connection keeps dropping, move the camera and phone closer together. The Hero 4's Wi-Fi range is about 30 feet in open space, but walls and metal objects reduce it. Also check that you entered the password correctly — a single wrong character will prevent connection.

Frequently Asked Questions

Can I use any microSD card in the Hero 4?

Any microSD card will physically fit, but slow cards cause problems. Use a Class 10 or UHS-3 card rated for at least 90 megabytes per second write speed. Slower cards will cause video to stutter, drop frames, or stop recording without warning.

How long does a full battery last?

A full charge gives you about two hours of recording at 1080p and 60 frames per second, or about one hour at 4K. Battery life is shorter in cold weather and when using Wi-Fi. Bring a second battery if you plan to film longer than two hours.

What is the difference between the Hero 4 Black and Silver?

The Black model records at higher resolutions and frame rates — up to 4K at 30 frames per second and 1080p at 120 frames per second. The Silver maxes out at 4K at 15 frames per second. The Black also has a touchscreen; the Silver does not. Both are waterproof and use the same mounts.

Can I edit video directly on the camera?

No. The Hero 4 records and stores video, but does not have editing software built in. Transfer your files to a computer and use video editing software like Adobe Premiere, Final Cut Pro, or free options like DaVinci Resolve or iMovie.

What should I do if water gets inside the camera?

Stop using it when ready and do not charge it. Let the camera dry completely in a warm, dry place for at least 24 hours before attempting to use it again. If water has reached the battery or circuit board, the camera may be permanently damaged and will need professional repair.