Power On and Basic Setup
The GoPro Hero 5 powers on with a single button on the back of the camera, just below the screen. Press and hold it for three seconds until you see the GoPro logo appear on the touchscreen. The camera will beep once it's fully awake — this takes about five seconds.
When you first turn it on, the camera will ask you to select your language and set the date and time. Use your finger to tap the screen and scroll through the options. Getting the date and time right matters because it stamps every video and photo you take. If the battery is low, the camera may ask you to charge it before letting you proceed — plug the USB-C cable into the port on the bottom of the camera and connect it to a power adapter or computer.
Once setup is complete, the camera returns to the main screen. You'll see icons for different recording modes along the bottom: Video, Photo, Burst, Time Lapse, and Slow Motion. The mode you're currently in is highlighted in white.
Key Takeaways
- Press and hold the power button on the back for three seconds to turn the camera on, and the same button turns it off.
- Tap the red record button on the front of the camera to start and stop video recording in any mode.
- Swipe left or right on the touchscreen to switch between Video, Photo, Burst, Time Lapse, and Slow Motion modes.
- The camera saves files to a microSD card, which you must insert into the slot on the side before recording anything.
- Battery life is roughly 60 to 90 minutes of continuous video recording, depending on resolution and frame rate settings.
Recording Video and Using the Red Button
The red record button sits on the top front of the camera. Tap it once to start recording — you'll see a red circle appear on the screen and hear a beep. The camera records everything the lens sees. Tap the red button again to stop recording. The file saves automatically to your microSD card.
While recording, the screen shows how much time you've captured in the top left corner and how much storage space is left on your card in the top right. If the card fills up, recording stops and the camera tells you the card is full. You can review what you just shot by swiping left on the screen to open the gallery, or keep recording in a different mode by swiping right.
The Hero 5 records in several video formats. The default is 1080p at 60 frames per second, which balances quality and file size. You can change this in the Settings menu — tap the gear icon on the main screen — but the default works well for most situations. Higher resolutions like 4K use more battery and fill your card faster.
Switching Between Recording Modes
The Hero 5 has five main recording modes, and you switch between them by swiping left or right on the touchscreen. Video is the standard mode for continuous recording. Photo takes single still images when you tap the red button. Burst captures multiple photos in rapid succession — useful for action shots where you want to pick the best frame later. Time Lapse records one frame at set intervals, then plays them back fast to show change over time. Slow Motion records at a higher frame rate so playback appears slower than real speed.
Each mode has its own settings. In Video mode, you can adjust resolution and frame rate. In Photo mode, you can turn on burst settings. In Time Lapse, you set how often the camera takes a photo — every second, every two seconds, or longer intervals. Swipe through the modes on the main screen until the one you want is highlighted, then tap the red button to record.
Understanding the Touchscreen and Settings
The back touchscreen is how you navigate the camera. Tap icons to open menus, swipe to move between screens, and tap again to select an option. The main screen shows your current mode and battery level in the top left. If the screen seems unresponsive, make sure your fingers are clean and dry — water or dirt on the screen can interfere with touch.
To reach settings, tap the gear icon on the main screen. From there you can change video resolution, frame rate, field of view, and other options. Most settings have a default that works fine, but if you want to record in 4K or adjust slow-motion speed, this is where you do it. Tap the back arrow to return to the main screen when you're done.
The camera also has a front-facing screen that shows basic information like recording status and remaining battery. This screen is small and doesn't let you navigate menus — it's mainly for checking that the camera is recording when you're holding it in front of your face.
Managing Your MicroSD Card and Storage
The Hero 5 requires a microSD card to record anything. The card slot is on the side of the camera. If you haven't inserted a card yet, the camera will remind you. Push the card in until it clicks, and the camera recognizes it automatically. You don't need to format the card in the camera first — it will do that the first time you record.
Video files take up space quickly. A one-hour video in 1080p at 60 frames per second uses roughly 3 to 4 gigabytes. A 64GB card holds about 16 to 20 hours of video at that setting. If you plan to record longer sessions, bring a second card or transfer files to a computer between shoots. To remove the card, push it in gently until it pops out, then pull it free.
You can view files on the camera by swiping left on the main screen to open the gallery. Tap a file to play it back. To delete a file, tap the trash icon. To transfer files to a computer, connect the camera to a USB port with the included cable, and your computer will recognize it as a removable drive.
Battery Life and Charging
The Hero 5 comes with a rechargeable battery that lasts roughly 60 to 90 minutes of continuous video recording. The actual time depends on resolution, frame rate, and whether you're using features like image stabilization. Higher resolutions and frame rates drain the battery faster. The battery icon in the top left of the screen shows how much charge remains.
Charge the battery by connecting the camera to a power adapter with the USB-C cable. Charging from empty to full takes about two hours. You can also charge the camera from a computer's USB port, though this is slower. If you plan to record for longer than 90 minutes, bring a second battery or a portable power bank with a USB-C port.
The camera powers off automatically if you don't use it for several minutes. This saves battery when you're between shots. You can turn it back on by pressing the power button again.
Connecting to WiFi and Transferring Files
The Hero 5 has built-in WiFi, which lets you view live video on your phone and transfer files wirelessly. To turn on WiFi, tap the WiFi icon on the main screen — it looks like a radio signal. The camera creates its own network that you can connect to from your phone's WiFi settings. Once connected, you can use the GoPro app to view what the camera sees in real time and read videos to your phone.
The GoPro app is free and available for both iPhone and Android. read it from the App Store or Google Play, then open it and select your camera from the list of available networks. The app shows a live preview of what the camera is recording and lets you start and stop recording remotely. You can also browse files on the camera and transfer them to your phone.
WiFi drains the battery faster than recording alone, so turn it off when you're done transferring files. Tap the WiFi icon again to disconnect.
Frequently Asked Questions
What do I do if the camera won't turn on?
First, charge the battery for at least 30 minutes using the USB-C cable. If the camera still won't power on, try a hard reset: hold the power button for 10 seconds, then release it. If it still doesn't respond, the battery may be completely drained — leave it charging overnight and try again in the morning.
Can I record underwater with the Hero 5?
Yes. The Hero 5 is waterproof to 33 feet without a case. If you plan to go deeper, you can buy a protective housing that extends the depth rating. The touchscreen works underwater, so you can still tap buttons and navigate menus.
Why is my video blurry or out of focus?
The Hero 5 focuses automatically, but it works best when there's enough light. In dim conditions, video may appear soft. Make sure the lens is clean — wipe it gently with a dry cloth. If you're recording fast action, try enabling image stabilization in the settings, which smooths out shaky footage.
How do I delete files from the camera?
Swipe left on the main screen to open the gallery, tap the file you want to delete, then tap the trash icon. The camera asks you to confirm — tap "Delete" again to remove the file permanently. You can also delete files from your computer after transferring them.
What happens if my microSD card is full?
Recording stops automatically and the camera displays a message saying the card is full. You can delete old files to make space, transfer files to a computer, or insert a new card. The camera does not overwrite old files — it straightforward stops recording.