Power On and Basic Setup
The GoPro Hero 4 powers on with a single button press on the back of the camera, just below the screen. Hold it for two seconds until you see the GoPro logo appear and hear a startup sound. The camera will take about 10 seconds to fully boot—you'll know it's ready when the screen shows the live preview from the lens.
On first startup, the camera will ask you to select your language and set the date and time. Use the side buttons to navigate: the top button moves forward, the bottom button moves backward. Press the back button (the one you used to power on) to confirm your selection. Getting the date and time right matters because it stamps every video and photo you take.
Once setup is complete, insert a microSD card into the slot on the right side of the camera if you haven't already. The Hero 4 needs a card to record—it won't save anything to internal memory. A Class 10 microSD card rated for at least 60 Mbps write speed works best; slower cards may cause the camera to drop frames or stop recording unexpectedly.
Key Takeaways
- Press and hold the back power button for two seconds to turn on the camera, then wait 10 seconds for the full startup sequence.
- The Hero 4 has two main recording modes—Video and Photo—selected by pressing the top button on the back of the camera.
- Press the shutter button (the large button on top) once to start recording video, and press it again to stop.
- The camera records to a microSD card only, so insert one before you try to record anything.
- The screen on the back shows what the lens sees in real time, and the red dot in the top right corner indicates when the camera is actively recording.
Switching Between Video and Photo Modes
The Hero 4 has two main recording modes: Video and Photo. You switch between them by pressing the top button on the back of the camera. Each time you press it, the mode indicator on the screen changes. Video mode shows a camera icon with a red circle; Photo mode shows a still-camera icon.
In Video mode, the camera records continuous footage at your chosen resolution and frame rate. In Photo mode, the camera takes individual still images—one per shutter button press. There's also a Burst mode (multiple photos in rapid succession) and Time Lapse mode (photos at set intervals that play back as a video), but these are accessed through the settings menu, not the mode button.
Most people start with Video mode because it's the most straightforward: press the shutter button once to start, press it again to stop. The red recording indicator in the top right corner of the screen turns on when the camera is actively recording, so you always know whether you're capturing footage.
Recording Your First Video
Make sure you're in Video mode (the screen shows the camera icon with a red circle), then press the large shutter button on top of the camera. You'll hear a beep and see the red recording indicator light up in the top right corner of the screen. The camera is now recording everything the lens sees.
The Hero 4 records in 1080p (1920 × 1080 pixels) at 60 frames per second by default, which is a good all-purpose setting for most situations. If you want to change the resolution or frame rate, you'll need to go into the settings menu—press the back button to open the menu, then navigate to Video Resolution or Frame Rate. Higher resolutions and frame rates use more storage space and battery power, so stick with the default unless you have a specific reason to change it.
To stop recording, press the shutter button again. You'll hear another beep, the red indicator disappears, and the camera saves the video file to your microSD card. The entire process takes just a few seconds. If the camera runs out of battery or the card fills up, recording stops automatically and the file is saved.
Understanding the Screen and Status Indicators
The screen on the back of the Hero 4 shows a live preview of what the front lens is seeing. This is called the live view, and it's your main way to frame shots and see what you're recording. The screen also displays several status indicators in the corners and edges.
The red dot in the top right corner is the recording indicator—it lights up solid red when the camera is actively recording video or taking photos. The battery icon appears in the top left corner and shows how much charge remains; if it's nearly empty, the icon turns red. The microSD card icon appears next to the battery icon; if the card is full or not inserted, you'll see a warning symbol instead.
At the bottom of the screen, you'll see the current mode (Video or Photo), the resolution and frame rate (for example, 1080p 60fps), and the remaining storage space on your card. If you see a blinking warning icon or a message like "Card Full" or "Low Battery," the camera is telling you it's running out of space or power and you need to act soon.
Adjusting Settings Without a Computer
You can change most common settings directly on the camera without connecting it to a computer. Press the back button to open the main menu. The menu shows options like Video Resolution, Frame Rate, Photo Resolution, White Balance, and Protune (advanced color and exposure controls). Use the top and bottom buttons to scroll through the menu, and press the back button again to select an option.
For everyday use, the default settings work well. Video Resolution is set to 1080p, Frame Rate is 60fps, and Photo Resolution is 12 megapixels. If you're recording in very bright sunlight, you might want to adjust the White Balance to "Sunny" instead of "Auto" to avoid washed-out colors. If you're recording indoors under artificial lights, try "Tungsten" instead.
Protune is an advanced mode that gives you manual control over color, ISO (light sensitivity), and shutter speed. It's useful if you plan to edit your footage later and want more control, but it makes the files much larger and requires more storage space. Leave it off unless you know you need it.
Powering Off and Saving Battery
To turn off the camera, press and hold the back power button for two seconds, just as you did to turn it on. The screen will go dark and the camera will shut down completely. This is the only way to power off the Hero 4—there's no standby mode.
The Hero 4 battery lasts roughly 60 to 90 minutes of continuous recording in normal conditions, depending on the resolution, frame rate, and temperature. Cold weather drains the battery faster, sometimes cutting the runtime in half. If you're planning a long day of recording, bring a second battery or a portable charger.
To extend battery life, turn off the camera when you're not actively recording instead of leaving it on in standby. Lowering the screen brightness (in the settings menu) also helps. If the battery icon turns red, you have only a few minutes of recording time left before the camera shuts down automatically.
Transferring Videos to Your Computer
To move your videos and photos off the camera, connect the Hero 4 to your computer using the USB cable that came in the box. Plug the small end into the port on the side of the camera (next to the microSD card slot) and the larger end into your computer. The camera will appear as a removable storage device on your computer, just like a USB drive.
Open the camera's storage folder and navigate to the DCIM folder, then the 100GOPRO folder. Your video files will be there with names like GH010001.MP4, GH010002.MP4, and so on. You can copy these files to your computer's hard drive, edit them in video software, or upload them directly to social media.
Alternatively, you can remove the microSD card from the camera and insert it into a card reader connected to your computer. This is faster than using the USB cable and doesn't drain the camera's battery. Either method works—choose whichever is more convenient for you.
Frequently Asked Questions
Why won't my GoPro Hero 4 turn on?
The battery may be completely drained. Connect the camera to a charger using the USB cable and wait at least 30 minutes before trying again. If the camera still won't power on after charging for an hour, try a hard reset: hold the power button for 10 seconds, release it, then press it again for two seconds. If it still doesn't work, the battery may be defective and need replacement.
How do I know if my microSD card is compatible?
The Hero 4 works with microSD cards up to 128GB in size. Use a Class 10 card rated for at least 60 Mbps write speed—this is usually printed on the card or its packaging. SanDisk, Kingston, and Lexar are reliable brands. Avoid very cheap cards, as they often drop frames or fail unexpectedly during recording.
Can I record in 4K on the Hero 4?
No. The Hero 4 maxes out at 1080p video resolution. If you need 4K recording, you would need a newer GoPro model like the Hero 5 or later. The Hero 4 is still excellent for 1080p footage and is widely used for action sports and travel videos.
What should I do if the camera gets wet?
The Hero 4 is water-resistant to 40 meters (130 feet) without a housing, so brief exposure to water or rain is fine. Rinse it with fresh water afterward if it's been in salt water. Dry it completely before opening the battery or card compartments. If water gets inside the camera, turn it off when ready and let it air-dry for 24 hours before powering it back on.
How long does the battery take to charge?
A fully drained battery takes about two to three hours to charge completely using the standard USB charger. Charging time varies depending on whether you're using the camera while it charges (which slows charging) and the power output of your charger. A higher-amperage charger (2A or more) charges faster than a standard 1A charger.