Getting Your GoPro Hero 5 Ready to Record

The GoPro Hero 5 powers on by pressing the shutter button on top for three seconds. The camera will vibrate and show the GoPro logo on its small rear screen. Before you record anything, you need to insert a microSD card into the slot on the side — the camera will not save video without one. Use a card rated for at least UHS-3 speed; SanDisk Extreme and Samsung EVO Plus cards work reliably with this model.

Charge the battery fully before your first use. The Hero 5 comes with a USB-C cable and a wall charger. Plug the cable into the USB-C port on the bottom of the camera and connect it to power. The front-facing light will glow red while charging and turn green when full. A complete charge takes roughly two hours and gives you about 60 to 90 minutes of recording time, depending on resolution and frame rate.

The camera is waterproof to 33 feet without a housing, so you can take it in the pool or light rain right out of the box. For deeper water or rough conditions, use the protective housing that comes in the box — it extends waterproof depth to 131 feet.

Key Takeaways

  • Press the shutter button on top for three seconds to power on, and insert a UHS-3 microSD card before recording anything.
  • The Hero 5 records video by pressing the shutter button once; press it again to stop, and the file saves automatically to your card.
  • Change resolution and frame rate in the Settings menu by pressing the mode button, then scrolling to the camera icon and selecting Video.
  • The camera is waterproof to 33 feet without a case and 131 feet with the protective housing included in the box.
  • Transfer video to your phone or computer using the GoPro app over WiFi, or connect the camera directly to a computer with the USB-C cable.

Recording Video and Switching Modes

To record video, press the shutter button on top once. The screen will show a red dot and a timer counting up. Press the shutter button again to stop recording. The file saves automatically to your microSD card with no extra steps needed.

The Hero 5 has four main modes: Video, Photo, Burst, and Time Lapse. Switch between them by pressing the mode button on the back of the camera (the one with the three horizontal lines). Each press cycles to the next mode. The screen shows which mode you are in with an icon in the top left corner.

Video mode is the default and what most people use. Photo mode takes a single still image when you press the shutter button. Burst mode captures multiple photos in rapid succession — useful for action shots where you want to pick the sharpest frame later. Time Lapse records one frame at set intervals, so you can compress hours of activity into seconds of video.

Adjusting Video Resolution and Frame Rate

The Hero 5 records at different resolutions and speeds depending on what you are shooting. To change these settings, press the mode button until you reach Video mode, then press the settings icon (the gear symbol) on the screen. Scroll down until you see the camera icon and press it.

You will see options for Video Resolution and Frame Rate. Resolution choices include 4K (3840 × 2160), 2.7K, 1440p, and 1080p. Frame rate options are 24, 30, 60, and 120 frames per second. Higher resolution and frame rate use more battery and storage space. For most casual recording, 1080p at 60 fps is a good balance. Use 4K at 30 fps if you want the sharpest, largest image and do not mind the file sizes.

The Hero 5 also has a Superview mode that stretches the image to use the full width of the camera's lens. This is useful for action footage because it captures more of what is happening around you. You can turn Superview on or off in the same Video settings menu.

Using WiFi and the GoPro App

The Hero 5 has built-in WiFi, which lets you control the camera from your phone and transfer video wirelessly. read the GoPro app on your iPhone or Android phone. Open the app and tap the camera icon at the bottom. The app will search for your camera.

On the camera itself, press the WiFi button (the icon that looks like curved lines) on the back. The screen will show a WiFi name and password. Enter these into your phone's WiFi settings, then return to the GoPro app. The app will connect and show a live preview from the camera. You can press the shutter button in the app to start and stop recording remotely.

To transfer video, tap the media icon in the app (usually a folder or gallery symbol). Select the videos you want to read. The app will copy them to your phone's camera roll. This process is slower than a USB cable but useful if you want to share clips right away without carrying a computer.

Connecting to a Computer and Transferring Files

Connect the Hero 5 to a Windows or Mac computer using the USB-C cable that came in the box. Plug the cable into the USB-C port on the bottom of the camera and the other end into your computer. The camera will show a charging icon on the screen.

On Windows, the camera will appear as a removable drive in File Explorer. On Mac, it will show up on the desktop as a mounted volume. Open the DCIM folder, then the 100GOPRO folder inside it. Your video files are stored here as .MP4 files. You can drag them to your computer's hard drive or an external drive.

Transferring over USB is much faster than WiFi, especially for 4K video. A full microSD card can take 30 minutes to an hour over WiFi but only 5 to 10 minutes over USB. If you are transferring large amounts of footage, use the cable.

Mounting and Protecting Your Camera

The Hero 5 has a standard GoPro mount on the bottom. The camera comes with a curved adhesive mount and a flat adhesive mount. Clean the surface where you want to stick the mount with rubbing alcohol and let it dry completely. Peel the backing off the mount and press it firmly for 30 seconds. Wait at least 24 hours before using the camera on that mount.

For helmets, handlebars, and poles, GoPro sells clip mounts and arm mounts separately. These screw onto the standard mount on the bottom of the camera. The protective housing also has a standard mount built in, so you can use any GoPro accessory with it.

The Hero 5 is tough, but the lens can scratch. Always use the lens cap when the camera is not in use. If you are taking it in saltwater, rinse the entire camera with fresh water afterward, even though it is waterproof — salt can corrode the ports and buttons over time.

Troubleshooting Common Issues

If the camera will not power on, the battery may be dead. Plug it in and charge for at least 30 minutes, then try again. If it still will not turn on, hold the power button for 10 seconds — sometimes the camera locks up and needs a hard reset.

If video is not saving, check that your microSD card is inserted all the way and that it is not full. The camera will not record if the card has no space left. You can also try formatting the card in the camera. Press the settings icon, scroll to the wrench icon, and select Format Card. This erases everything on the card, so transfer your files first.

If the WiFi will not connect, restart both the camera and your phone. Make sure your phone is on the same WiFi network as the camera — the camera creates its own network, not a standard one. If the app still will not see the camera, uninstall and reinstall the GoPro app.

If video is choppy or freezes, your microSD card may be too slow. The Hero 5 needs a UHS-3 card for smooth 4K recording. If you are using an older or slower card, drop the resolution to 1080p or 2.7K.

Frequently Asked Questions

How long does the battery last on a single charge?

Battery life ranges from 60 to 90 minutes depending on resolution, frame rate, and whether you are using WiFi. Recording at 1080p uses less power than 4K. WiFi drains the battery faster than recording alone. Cold temperatures also reduce battery life significantly.

Can I use any microSD card with the Hero 5?

The camera works with any microSD card, but it performs best with UHS-3 cards rated for at least 90 MB/s write speed. Slower cards may cause video to stutter or drop frames, especially at 4K resolution. SanDisk Extreme and Samsung EVO Plus are reliable choices.

What is the difference between Superview and standard video?

Superview stretches the image to use the full width of the lens, capturing a wider field of view. Standard video shows a narrower, more traditional rectangular frame. Superview is better for action because it shows more of the surroundings, but some people find the stretched look unnatural.

How do I delete video from the camera?

Press the mode button to reach Video mode, then press the settings icon. Scroll to the folder icon and select Delete. You can delete individual files or all files at once. Deleted files cannot be recovered, so transfer important footage to your computer first.

Does the Hero 5 have image stabilization?

Yes, the Hero 5 has electronic image stabilization built in. It smooths out shaky footage from handheld recording or movement. You can turn stabilization on or off in the Video settings menu. Turning it off saves battery and storage space if you are using a tripod or mount.