The GoPro Hero 4 is waterproof to 40 meters without a housing
The GoPro Hero 4 comes with built-in waterproofing that lets you use it underwater down to 40 meters (about 130 feet) straight out of the box. You do not need to buy an extra case or housing for casual water activities like snorkeling, swimming, or light rain.
That 40-meter rating means the camera itself is sealed against water intrusion. The seals are around the battery door, the USB port, and the SD card slot. As long as those doors are closed properly, water will not reach the electronics inside.
The Hero 4 comes in two versions — the Hero 4 Black and the Hero 4 Silver — and both have the same waterproof rating. Neither one requires you to do anything special to set up the waterproofing; it is built in from the factory.
Key Takeaways
- The GoPro Hero 4 is waterproof to 40 meters without any additional housing or case.
- You must close the battery door, USB port cover, and SD card slot completely for the waterproofing to work.
- Beyond 40 meters, you will need the official GoPro Super Suit or another protective housing to go deeper.
- Saltwater, sand, and chlorine can damage the seals over time, so rinse the camera with fresh water after each use in those environments.
What the 40-meter rating actually covers
The 40-meter waterproof rating is tested under specific conditions: the camera submerged in still water with all ports sealed. This covers swimming, snorkeling, and underwater video at moderate depths. It does not cover high-pressure jets from a hose or waterfall, which can force water past the seals even though the camera is rated for that depth.
Depth is only one part of the equation. The rating assumes the seals are in good condition. If you have dropped the camera, cracked the lens, or the rubber gaskets around the doors have dried out or cracked, the waterproofing fails even in shallow water. Check the seals visually before each water use, especially if the camera is older or has been stored for months.
How to keep the seals working
The waterproofing depends entirely on the rubber gaskets that line the battery door and port covers. These gaskets can degrade if they dry out, get pinched, or are exposed to extreme heat. After each use in water, rinse the entire camera with fresh water — this is especially important after saltwater, chlorine, or muddy water.
When you close the battery door or port covers, push them until you hear or feel a click. Do not force them, but do not leave them loose either. A door that is not fully seated will let water in even at shallow depths. If a door is hard to close or does not click, stop and inspect the gasket for debris or damage before trying again.
Store the camera with the doors slightly ajar in a cool, dry place. Leaving the doors sealed shut for weeks can trap moisture and cause the gaskets to stick or degrade. If you are storing it for more than a month, open the doors and let the camera air dry completely first.
When you need a housing for deeper water
If you want to dive deeper than 40 meters, you will need the GoPro Super Suit, which is the official protective housing for the Hero 4. The Super Suit extends the waterproof rating to 60 meters. It is a rigid plastic case that completely encloses the camera and has its own sealed ports for the lens and controls.
Third-party housings are also available, but they vary in quality and depth rating. Check the manufacturer's specifications carefully — some are rated for 30 meters, others for 60. The official Super Suit is more expensive but is designed specifically for the Hero 4's dimensions and button layout, so it is easier to use underwater.
Saltwater, chlorine, and sand damage the seals
The 40-meter rating assumes freshwater. Saltwater, chlorine pools, and sand are harder on the gaskets and can corrode the metal parts inside the camera over time. After use in any of these environments, rinse the camera thoroughly with fresh water within an hour. Do not let saltwater or chlorine dry on the camera.
Sand is particularly damaging because grains can get trapped in the door seals and prevent them from closing fully. Rinse the camera gently with fresh water and a soft cloth, and do not force the doors closed if you feel resistance. If sand is stuck in a seal, use a soft brush or compressed air to clear it before closing the door.
Signs the waterproofing has failed
If you see condensation inside the lens or on the screen after water use, the seals have failed. Condensation means water vapor has entered the camera. Do not use it in water again until you have had it inspected or repaired. Continuing to use a camera with failed seals will damage the electronics.
If a door is cracked, the lens is visibly damaged, or a gasket is visibly torn or missing, the waterproofing is compromised. GoPro offers repair services, but it is usually cheaper to replace the damaged part if it is just a door or gasket. Check the GoPro website or contact their support team to order replacement parts.
Frequently Asked Questions
Can I use the Hero 4 in a shower or bathtub?
Yes. Showers and baths are well within the 40-meter rating and do not involve the high-pressure jets or turbulence that can damage seals. Make sure the battery door and all port covers are fully closed before you bring the camera into the bathroom.
What happens if water gets inside the camera?
Water inside the camera will short the electronics and cause permanent damage. If you suspect water has entered, do not try to turn it on. Remove the battery, open all doors, and let the camera air dry in a warm, dry place for at least 48 hours. If it still does not work after drying, contact GoPro support about repair options.
Do I need to do anything special before taking the Hero 4 underwater for the first time?
Check that the battery door, USB port cover, and SD card slot are all present and not cracked. Close each one firmly until you hear a click. Rinse the camera with fresh water after use. That is all you need to do — no special preparation is required.
Can the Hero 4 survive a drop into water?
Yes, as long as the seals are intact and the camera is not damaged by the impact. A drop from waist height into a pool or lake should not harm it. However, if the drop cracks the lens, housing, or a door, the waterproofing is compromised and you should not use it in water until it is repaired.
Is the GoPro Hero 4 still waterproof if it is several years old?
It depends on how it was stored and used. If the gaskets have dried out or cracked, the waterproofing fails even if the camera is new in the box. Inspect the seals visually before each water use. If they look cracked or brittle, GoPro sells replacement gasket kits that are inexpensive and straightforward to install.