The GoPro Hero 5 is waterproof to 33 feet without a case

Yes, the GoPro Hero 5 is waterproof on its own. The camera has a waterproof rating of 33 feet (10 meters), which means you can submerge it to that depth without any additional housing or case. This depth is enough for snorkeling, pool use, and casual water sports where you won't go deeper than about three stories underwater.

The waterproofing comes from the camera's sealed body design. GoPro engineered the Hero 5 with internal seals and gaskets that prevent water from entering the electronics. You don't need to open the camera or install anything special—it's waterproof straight out of the box.

That said, the 33-foot limit is a hard boundary. If you plan to dive deeper, use the camera in saltwater regularly, or expose it to high-pressure water jets, you'll need additional protection. The camera's seals can wear over time, especially if you rinse it in freshwater after saltwater use but don't dry it thoroughly.

Key Takeaways

  • The GoPro Hero 5 is waterproof to 33 feet without any case or housing, making it safe for snorkeling and pool use.
  • Saltwater exposure degrades the seals faster than freshwater, so rinse and dry the camera thoroughly after ocean use.
  • For diving deeper than 33 feet, you need the optional Super Suit protective housing, which extends waterproofing to 196 feet.
  • The camera's waterproof seals can fail if the battery door or USB cover is not closed completely, so check both before water exposure.
  • Avoid pointing the camera directly at high-pressure water jets or waterfalls, as the force can force water past the seals even at shallow depths.

How the waterproofing actually works

The Hero 5's waterproof design relies on rubber gaskets and sealed compartments. The battery door and USB-C port cover both have gaskets that create a watertight seal when closed. If either door is loose or not fully seated, water will enter the camera and damage the electronics inside.

Before any water use, open both doors and inspect the gaskets for cracks, tears, or visible debris. A grain of sand or a hair caught in the gasket can prevent a complete seal. If you see damage, you can order replacement gaskets from GoPro, but a damaged gasket means the camera is not waterproof until it's replaced.

The 33-foot rating assumes normal submersion—meaning the camera is underwater but not being blasted by water pressure. High-pressure water from a waterfall, jet ski spray, or a shower head can force water past the seals even at shallow depths. If you're using the camera in moving water, keep it away from direct pressure.

Saltwater versus freshwater: why it matters

Saltwater is harder on the Hero 5's seals than freshwater. Salt crystals can lodge in the gaskets and corrode the metal contacts inside the camera, even if no water actually entered. After any saltwater use, rinse the camera thoroughly with fresh water and dry it completely with a soft cloth.

Pay special attention to the battery door and USB cover—these are where salt residue accumulates. Wipe around the edges of both doors and let the camera air-dry for at least an hour before closing the doors again. If you use the camera in saltwater regularly, plan to replace the gaskets every 12 to 18 months, depending on how often you use it.

Freshwater is gentler on the seals, but the same drying rule applies. Chlorinated pool water can degrade gaskets faster than ocean water, so rinse and dry after pool use as well.

When you need the Super Suit protective housing

If you plan to dive deeper than 33 feet, you need the GoPro Super Suit, which is an optional protective case. The Super Suit extends the waterproof rating to 196 feet (60 meters), making it suitable for recreational scuba diving and deeper snorkeling. The case is a rigid plastic shell with a clear front lens that mounts to the camera.

The Super Suit also protects the camera from impact and abrasion, which is useful if you're mounting it on a helmet or vehicle in rough conditions. However, it adds bulk and weight, and the clear front can fog up in cold water or when moving between very different temperatures. You'll need to allow the case to acclimate to the water temperature before submerging to avoid condensation inside the lens.

The Super Suit is not required for casual water use. Reserve it for serious diving, extended saltwater expeditions, or situations where you need the extra protection from impact.

Common mistakes that damage the waterproof seals

The most common mistake is not closing the battery door or USB cover completely. Both doors have a small latch or clip that must be fully engaged. If you close the door but don't hear or feel a click, it's not sealed. Check both doors by hand before any water exposure.

Another mistake is leaving the camera wet for extended periods. If you use it in water and then leave it in a bag or case without drying it, moisture can accumulate inside and corrode the electronics. Dry the camera with a soft cloth when ready after water use, and leave the battery door open for 30 minutes to allow air circulation inside.

Dropping the camera or bumping the battery door against a hard surface can crack the gasket or misalign the door, breaking the seal. Even a small crack is enough to let water in. If you've dropped the camera, open the battery door and inspect the gasket before using it in water again.

Testing the seal before you go deep

Before taking the Hero 5 into deep water or saltwater for the first time, test it in a controlled environment. Fill a clear glass or container with water and submerge the camera for 30 seconds while watching for bubbles or water seeping in. If you see any water inside the lens or around the edges, the seal is broken and you need to replace the gaskets.

This test is especially important if the camera is used, if you've recently replaced the battery, or if you've dropped it. A straightforward 30-second test can save you from losing the camera to water damage.

Warranty and water damage claims

GoPro's standard warranty does not cover water damage caused by user error—such as a loose battery door, a cracked gasket, or use deeper than the rated depth. If water enters the camera because the door wasn't closed properly, GoPro will not repair it for free.

However, if the camera fails due to a manufacturing defect in the seals or the door mechanism, GoPro may cover the repair under warranty. You'll need to prove that you followed the care instructions and that the failure was not caused by impact or misuse. Keep your receipt and document the condition of the gaskets if you need to file a claim.

Frequently Asked Questions

Can I use the Hero 5 in a swimming pool?

Yes. The 33-foot waterproof rating is more than enough for pool use. Rinse the camera with fresh water after pool use to remove chlorine, and dry it completely before storing it. Chlorine can degrade the gaskets over time, so regular rinsing extends the life of the seals.

What happens if water gets inside the camera?

If water enters the camera, the electronics will short out and the camera will stop working. Saltwater causes corrosion that can damage the circuit board permanently. If you suspect water has entered, do not try to power on the camera. Remove the battery, open the doors, and let it dry in a warm, dry place for 24 hours. After drying, you can try powering it on, but internal damage may be permanent.

Do I need to replace the gaskets regularly?

Gaskets last longer if you rinse and dry the camera after each water use. In freshwater use, gaskets typically last 2 to 3 years. In saltwater use, plan to replace them every 12 to 18 months. You can order replacement gasket kits from GoPro for about $10 to $15.

Is the Hero 5 waterproof if I'm using an external microphone?

No. Any external accessory that plugs into the USB port or headphone jack breaks the waterproof seal. If you want to use an external microphone in water, you need the Super Suit housing, which has ports designed for accessories.

Can I use the Hero 5 in a hot tub or sauna?

No. Hot water and steam can damage the seals and internal electronics. The waterproof rating assumes cool to warm water, not temperatures above 104°F (40°C). Avoid using the camera in hot tubs, saunas, or near boiling water.