Yes, the GoPro Hero 5 is waterproof without a case, but only to 33 feet

The GoPro Hero 5 Black and Hero 5 Session are both waterproof to a depth of 33 feet (10 meters) straight out of the box. You do not need to buy a separate housing or case for basic water use like snorkeling, swimming, or filming in rain. The camera's body is sealed against water intrusion, and GoPro tested this rating in controlled conditions before release.

That 33-foot limit is the key number to remember. It means the camera can handle a pool, a lake, or ocean waves at the surface. It cannot handle diving deeper than 33 feet, and it is not rated for high-pressure water jets or extended submersion beyond that depth. If you plan to go deeper or use the camera in more demanding water conditions, you will need additional protection.

Key Takeaways

  • The Hero 5 is waterproof to 33 feet without any case or housing, so you can use it in pools, lakes, and ocean water at normal swimming depths.
  • The waterproof rating applies only to fresh water and salt water at rest; high-pressure jets, waterfalls, and white-water rapids can force water into seals over time.
  • If you plan to dive deeper than 33 feet, you must buy the optional Super Suit housing, which extends protection to 196 feet.
  • Salt water corrodes the camera's ports and buttons faster than fresh water, so rinse the camera with fresh water within an hour of use in the ocean.
  • The camera's microphone stops working underwater because water blocks sound, so audio recorded during water use will be muffled or absent.

How the 33-foot waterproof rating was tested

GoPro rates the Hero 5 to 33 feet based on submersion tests in a lab tank, not real-world conditions. The camera sits still in fresh water at that depth for a set time. This is different from actual use, where movement, pressure changes, and temperature shifts can stress the seals. A camera that passes the 33-foot test may still leak if you dive to that depth with rapid pressure changes or if you move it in and out of water repeatedly in cold conditions.

The rating also assumes the camera is in good condition with no cracks, loose buttons, or worn seals. If you have dropped the Hero 5 or noticed any damage to the body or ports, the waterproof rating may no longer hold. Inspect the camera before water use, especially around the battery door and USB port.

What the waterproof rating does and does not cover

The 33-foot rating covers submersion in still fresh water and salt water. It does not cover high-pressure water, which can force water past the seals even if the camera is rated for that depth. Waterfalls, white-water rapids, and pressure washers all deliver water with force that exceeds the rating. If you are filming near a waterfall or in rough water, treat the camera as if it is not waterproof and use a case.

Salt water is harder on the camera than fresh water, even though the rating covers both. Salt corrodes the metal contacts on the battery door, the USB port, and the buttons. If you use the Hero 5 in the ocean, rinse it with fresh water and dry it completely within an hour. Do not leave it wet overnight, and do not store it in a damp case. The corrosion happens slowly at first, then accelerates once it starts.

The waterproof rating also does not cover the microphone. Water muffles sound and blocks the microphone from picking up clear audio. If you record video underwater, the audio will be distorted or nearly silent. Many users disable the microphone before water use to avoid the muffled sound in their footage.

When you need the Super Suit housing for deeper water

If you plan to dive deeper than 33 feet, snorkel below the surface for extended periods, or use the camera in demanding water conditions like white-water kayaking, buy the GoPro Super Suit. This is an optional protective case that extends the waterproof rating to 196 feet (60 meters). The Super Suit is a rigid plastic shell that seals around the camera body and protects it from pressure, impact, and high-velocity water.

The Super Suit also protects the camera from drops and impacts on rocks or reefs. If you are filming in a river with rapids or near a rocky shore, the case is worth the cost even if you do not plan to dive deep. The trade-off is that the case makes the camera bulkier and harder to hold, and the lens dome can fog up in certain temperature conditions. You also cannot access the buttons or screen as easily, so you have to plan your shots before you seal the case.

Rinsing and drying after water use

After you use the Hero 5 in water, rinse it with fresh water as soon as you can. Use a soft cloth or a gentle stream from a tap—do not use a pressure washer or scrub the lens. Pay special attention to the battery door, the USB port, and the seams where the body halves meet. These are the places where salt and sand collect and cause corrosion or sand scratches.

Dry the camera completely before you store it. Use a soft, lint-free cloth to wipe down the body and lens. Leave the battery door open and let the camera air-dry for at least an hour before you close it and put it away. If you used it in salt water, let it dry for longer. Do not store the camera in a sealed case or bag while it is still damp, because moisture trapped inside will corrode the metal parts and damage the electronics.

Common mistakes that damage the waterproof seals

The most common mistake is opening the battery door or USB port while the camera is wet. Water can drip inside when you open these doors, and the seals are designed to keep water out when the doors are closed, not to protect the interior while they are open. Always dry the camera completely before you access the battery or ports.

Another mistake is using the camera in hot water or steam. The Hero 5 is not rated for hot tubs, saunas, or steam rooms. Heat can warp the seals and cause them to fail. The camera is also not rated for chlorinated pools over long periods—chlorine can degrade the seals and the lens coating over time. Rinse the camera after chlorine use just as you would after salt water.

Dropping the camera or hitting it against rocks can crack the body or loosen the seals without visible damage. If you have dropped the Hero 5 in water, take it out and inspect it carefully. Look for cracks, loose buttons, or gaps in the seams. If you see any damage, do not use it in water again until you have had it repaired or replaced.

Frequently Asked Questions

Can I use the Hero 5 in a swimming pool?

Yes. The Hero 5 is waterproof to 33 feet, which is deeper than any standard swimming pool. Chlorine can degrade the seals over time, so rinse the camera with fresh water after each pool session and dry it completely before you store it.

What happens if I take the Hero 5 deeper than 33 feet?

Water may seep into the camera body, damaging the electronics and the battery. The deeper you go, the greater the pressure and the higher the risk of failure. If you need to film below 33 feet, use the Super Suit housing, which is rated to 196 feet.

Will the Hero 5 work in salt water?

Yes, the waterproof rating covers salt water. However, salt corrodes the metal contacts and ports faster than fresh water does. Rinse the camera with fresh water within an hour of ocean use and dry it completely to prevent corrosion.

Can I film audio underwater with the Hero 5?

The microphone will pick up sound, but it will be muffled and distorted because water blocks sound waves. Most users disable the microphone before underwater recording to avoid the poor audio quality in their footage.

Do I need to buy a case if I only use the Hero 5 in a pool or lake?

No. The built-in waterproof rating is enough for pools, lakes, and calm ocean water at normal swimming depths. You only need a case like the Super Suit if you plan to dive deeper than 33 feet or use the camera in high-pressure water like waterfalls or rapids.