Not all GoPro models have the same waterproof rating
GoPro cameras vary in how deep they can go underwater. The newest models—Hero 11, Hero 10, and Hero 9—are waterproof to 33 feet (10 meters) without a case. Older models like the Hero 8 and Hero 7 are also waterproof to 33 feet. But the Hero 5 Session and some budget models have lower ratings, and a few older GoPros need a protective housing to be waterproof at all.
The depth rating tells you the maximum pressure the camera can handle, not how long it can stay submerged or how rough the water can be. A camera rated to 33 feet can handle splashes, rain, and brief dunking, but it is not built for diving or extended underwater use. If you plan to go deeper or stay underwater longer, you need an aftermarket protective housing—a rigid case that seals around the camera and lets you go much deeper.
Waterproofing also depends on condition. A cracked lens, a loose battery door, or sand in the seams can let water in even if the camera is rated waterproof. Rinsing with fresh water after saltwater use prevents corrosion and extends the life of the seals.
Key Takeaways
- Hero 11, Hero 10, Hero 9, Hero 8, and Hero 7 are all waterproof to 33 feet without any case or housing.
- Older models and budget GoPros have lower waterproof ratings or require a protective case, so check your specific model's specs before taking it near water.
- A waterproof rating of 33 feet is safe for splashes and brief submersion but not for diving or extended underwater filming.
- Protective housings can extend waterproof depth to 196 feet or more, but they add bulk and may affect audio and touch controls.
- Rinsing your GoPro with fresh water after saltwater use prevents seal damage and corrosion.
Waterproof ratings for current GoPro models
The Hero 11 Black, Hero 11 Black Mini, Hero 10 Black, and Hero 9 Black are all waterproof to 33 feet without a case. This is the standard for GoPro's flagship line. The Hero 11 and Hero 10 are nearly identical in waterproofing—both use the same sealed design and can handle the same depth.
The Hero 8 Black and Hero 7 Black also reach 33 feet. If you own either of these, you can take them swimming, snorkeling, or use them in rain without worry. The Hero 5 Session, an older compact model, is waterproof to only 33 feet as well, but it is no longer sold new.
Budget models like the Hero (the entry-level version without a color designation) are waterproof to 33 feet too. GoPro has standardized this depth across most of its lineup, so unless you own a very old model or a specialty camera, 33 feet is your baseline.
Older GoPro models and waterproof requirements
The Hero 6 Black, Hero 5 Black, and Hero 4 Black are waterproof to 33 feet. The Hero 3+ and Hero 3 are waterproof to 131 feet, which is deeper than current models—but these cameras are now several years old and harder to find in working condition.
The original Hero and Hero 2 are not waterproof on their own and require a protective housing to be used near water. If you have either of these, do not take them near water without a case. The same applies to the Hero Session and Hero 4 Session, which are waterproof to only 33 feet but are no longer in production.
Check the model name on your camera or the original box to confirm which version you own. The model is printed on the back of the camera or inside the battery compartment. If you are unsure, GoPro's support site has a full list of specs for every model ever made.
What 33 feet of waterproofing actually means
A waterproof rating of 33 feet (10 meters) is based on static pressure testing in a lab, not real-world conditions. The camera sits in a tank at that depth for a set time. In the ocean or a river, waves, currents, and movement can create extra pressure that exceeds the rating.
For everyday use, 33 feet is plenty. You can take your GoPro swimming, use it in the shower, film in the rain, and take it snorkeling in shallow water. The camera will survive accidental drops in a pool or lake. But do not rely on it for scuba diving or extended underwater filming below 20 feet, because the pressure and duration can exceed what the seals are designed for.
The waterproof rating also assumes the camera is in good condition. A cracked lens, a loose battery door, or sand trapped in the seams can compromise the seal. After each use in saltwater, rinse the camera with fresh water and let it dry completely before closing the battery door or lens cover.
Protective housings for deeper water use
If you need to go deeper than 33 feet, a protective housing is the answer. GoPro sells official housings rated to 196 feet (60 meters) for Hero 11 and Hero 10 models. Third-party manufacturers also make housings rated to 300 feet or more, though they vary in quality and fit.
A housing is a rigid plastic or aluminum case that seals around the camera with rubber gaskets. It protects the camera from pressure and impact but adds weight and bulk. The housing also affects how the camera handles sound—audio quality may drop because the microphone is muffled inside the case. Touch controls on the back screen may not work through the housing, so you have to use voice commands or pre-program settings before you submerge.
Official GoPro housings are more expensive than third-party options but fit precisely and are tested with each camera model. If you buy a third-party housing, check the reviews and make sure it is rated for your specific GoPro model. A loose fit defeats the purpose.
Seals and maintenance to keep your GoPro waterproof
The waterproof seals on your GoPro are rubber gaskets around the battery door and lens. Over time, these gaskets can dry out, crack, or collect sand and salt. If a gasket is damaged, water can seep in even if the camera is rated waterproof.
After each use in saltwater, rinse the entire camera under fresh running water. Pay special attention to the seams around the battery door and the lens. Let the camera air-dry completely—at least 2 to 4 hours—before you close the battery door or put the lens cover back on. Moisture trapped inside can cause corrosion or mold.
Every 6 to 12 months, inspect the rubber gaskets for cracks or hardening. If a gasket looks damaged, GoPro sells replacement gasket kits for most models. Replacing them is straightforward and takes about 5 minutes. A fresh gasket costs far less than a new camera and restores the waterproof seal.
Frequently Asked Questions
Can I take my GoPro diving?
Most GoPro models are rated to 33 feet, which is safe for snorkeling but not for scuba diving. If you dive deeper than 33 feet, use a protective housing rated for that depth. Check the housing specs before you buy—some are rated to 196 feet, others to 300 feet or more.
What happens if water gets inside my GoPro?
Water inside the camera can cause corrosion, short circuits, or mold. If water enters, turn off the camera when ready and do not use it. Remove the battery and let all parts air-dry for at least 24 hours in a warm, dry place. If corrosion has started, the camera may not recover. Prevention—rinsing after saltwater use and checking gaskets—is much easier than repair.
Do I need a case for my Hero 11 in the pool?
No. The Hero 11 is waterproof to 33 feet without any case, so it is safe for pool use, snorkeling, and rain. A protective housing is only necessary if you plan to go deeper than 33 feet or want extra impact protection.
Can I use my GoPro in a hot tub or sauna?
Hot water and steam can damage the seals faster than cold water. Avoid using your GoPro in hot tubs, saunas, or boiling water. Stick to room-temperature or cold water to protect the rubber gaskets.
How often should I replace the waterproof gaskets?
Gaskets last 6 to 12 months with regular use, especially in saltwater. Inspect them every few months for cracks or hardening. If they look damaged, replace them right away. Replacement gasket kits are inexpensive and take only a few minutes to install.