The GoPro Hero 5 is waterproof to 33 feet without a housing

Yes, the GoPro Hero 5 is waterproof straight out of the box. The camera has a waterproof rating of 33 feet (10 meters) when sealed properly. This means you can take it snorkeling, use it in the rain, or submerge it in a pool without a separate waterproof case.

The waterproof design comes from the camera's sealed body and rubberized seals around the battery door and USB port. However, this rating only holds if those seals are intact and closed correctly. A loose battery door or a cracked seal will let water inside and damage the camera.

If you want to go deeper than 33 feet—say, for scuba diving—you will need to buy GoPro's optional Super Suit housing, which extends the waterproof depth to 196 feet (60 meters). The Super Suit is a separate purchase and costs around $80 to $100.

Key Takeaways

  • The Hero 5 is waterproof to 33 feet without any case or housing, so it works for swimming, snorkeling, and water sports at the surface.
  • The waterproof seal depends on a closed battery door and sealed USB port, so check both before entering water.
  • Saltwater and chlorine can corrode the seals over time, so rinse the camera with fresh water after each use in pools or ocean.
  • For depths beyond 33 feet, you must use the GoPro Super Suit housing or another third-party waterproof case.
  • Sand and dirt can jam the battery door and break the seal, so keep the camera clean and dry before closing it.

How to keep the seals watertight

The Hero 5's waterproof rating depends entirely on two seals: the battery door and the USB port cover. Before you take the camera into water, open and close the battery door slowly to make sure it clicks firmly into place. You should hear a distinct snap and feel resistance as you push it down. If it closes too easily or feels loose, the seal may be damaged and the camera is not safe to submerge.

Check the rubber gasket around the battery door for cracks, tears, or hardening. If the rubber looks dry or brittle, it has lost its seal and needs to be replaced. GoPro sells replacement gaskets for around $15. The USB port cover should also close with a firm click—do not force it, but make sure it is fully seated.

Before closing the battery door, wipe the inside of the door and the gasket with a clean, dry cloth. Dirt, sand, or salt crystals trapped between the gasket and the door will prevent a watertight seal. This is the most common reason the Hero 5 leaks in water, even though the seals are intact.

Rinsing after saltwater and chlorine use

Saltwater and chlorine are corrosive and will degrade the rubber seals faster than fresh water. After using the Hero 5 in the ocean or a pool, rinse the entire camera under running fresh water for 30 seconds. Pay special attention to the battery door seam and the USB port—these are where salt and chlorine residue collects.

Do not submerge the camera in a bucket of fresh water to rinse it, because you risk opening the battery door underwater. Instead, hold the camera under a faucet or use a spray bottle. Let the camera air-dry completely before opening the battery door or charging it. Moisture inside the battery compartment can corrode the battery contacts and damage the internal electronics.

If you use the Hero 5 in saltwater regularly, inspect the seals every few months. Saltwater will eventually harden and crack the rubber, even with regular rinsing. Replacing the gasket before it fails is much cheaper than replacing the camera.

What happens if water gets inside

If water enters the camera, you will usually see condensation on the lens or inside the screen. The camera may still power on, but it will not record properly and the internal circuits will corrode over time. Saltwater damage is especially fast—corrosion can begin within hours.

If you suspect water has entered the camera, do not try to charge it or turn it on. Instead, open the battery door when ready and remove the battery. Leave the battery door open and place the camera in a warm, dry place for at least 48 hours. A sunny windowsill or a room with low humidity works well. Do not use a hair dryer or oven, because heat can damage the lens and internal components.

After 48 hours, insert the battery and try to power on the camera. If it turns on and the screen is clear, the camera may have survived. However, water damage can be hidden—corrosion inside the camera may not show up for weeks or months. If the camera behaves strangely after water exposure, contact GoPro support or consider having it professionally inspected.

When you need the Super Suit housing

The 33-foot waterproof rating is enough for most water activities: swimming, snorkeling, surfing, and paddleboarding. However, if you plan to scuba dive, freedive deeper than 33 feet, or use the camera on a boat in rough seas, you need additional protection.

The GoPro Super Suit is a rigid plastic housing that wraps around the Hero 5 and extends the waterproof depth to 196 feet (60 meters). It also protects the camera from impacts and sand. The trade-off is that the Super Suit adds bulk and weight, and the image quality may be slightly softer because the light passes through an extra plastic lens.

Third-party waterproof cases are also available from brands like Telesin and Neewer, usually for $30 to $50. These cases offer similar depth ratings and often cost less than the official Super Suit. Check the reviews to make sure the case is rated for the Hero 5 specifically—cases designed for other GoPro models may not fit or seal properly.

Common mistakes that break the waterproof seal

The most common mistake is leaving the battery door slightly open or not pushing it all the way closed. Even a gap of a millimeter will let water seep in. Always close the door slowly and listen for the click. If you are in a hurry or distracted, take an extra second to double-check.

Another mistake is opening the battery door while the camera is wet or damp. Water can drip into the battery compartment before you realize it. Always dry the outside of the camera completely with a cloth before opening any door or port. If you are at the beach or pool, dry the camera before you leave the water.

Dropping the camera or sitting on it can crack the seals invisibly. The camera may still look fine and work normally, but the gasket may be damaged. If the Hero 5 has taken a hard impact, inspect the battery door seam carefully under bright light. If you see any cracks in the rubber or the door does not close with a firm click, replace the gasket before taking it in water again.

Frequently Asked Questions

Can I use the Hero 5 in a hot tub or spa?

Yes, but rinse it when ready afterward with fresh water. Hot tubs contain chlorine and other chemicals that corrode the seals faster than cold pool water. The heat can also soften the rubber gasket temporarily, so wait until the camera cools to room temperature before opening the battery door.

What is the difference between waterproof and water-resistant?

Waterproof means the camera can be fully submerged to a specific depth without leaking. Water-resistant means it can handle splashes and light rain but should not be submerged. The Hero 5 is waterproof, not just water-resistant, so you can take it underwater.

Will the warranty cover water damage?

GoPro's standard warranty does not cover water damage caused by a broken seal or improper use. However, if the seal fails due to a manufacturing defect within the warranty period, GoPro may replace the camera. Contact GoPro support with photos of the damage to ask about your specific situation.

Can I use the Hero 5 in a washing machine or dishwasher?

No. The pressure and turbulence in a washing machine or dishwasher can force water past the seals, even though the camera is rated for 33 feet of static water pressure. Rinse the camera by hand under a faucet instead.

How long does the waterproof seal last?

The rubber gasket typically lasts one to two years with regular use in water. Saltwater and chlorine shorten the lifespan. Inspect the gasket every few months and replace it if you see cracks, hardening, or discoloration. A replacement gasket costs around $15 and takes five minutes to install.