The GoPro Hero 4 is waterproof to 40 meters without a housing
The GoPro Hero 4 comes with built-in waterproofing rated to 40 meters (131 feet) of depth. This means you can use it for snorkeling, shallow diving, water sports, and heavy rain without a separate protective case. The camera's body is sealed against water intrusion at the factory — no additional housing is required for normal water use.
That 40-meter rating applies to both the Hero 4 Black and Hero 4 Silver models. The waterproofing comes from the camera's design: sealed seams, rubberized gaskets around the battery door, and a lens that sits flush with the body. As long as you keep the battery door closed and the USB port cover in place, water cannot reach the internal electronics.
The camera is not waterproof at greater depths. If you plan to dive deeper than 40 meters or want extra protection during extreme water sports, you will need the optional Super Suit housing, which extends the depth rating to 60 meters and adds physical shock protection.
Key Takeaways
- The Hero 4 is waterproof to 40 meters without any additional case or housing required.
- The battery door and USB port cover must be fully closed for the waterproof seal to work.
- Saltwater and chlorine do not damage the camera, but rinsing it with fresh water after exposure prevents corrosion over time.
- The Super Suit housing is optional and extends depth protection to 60 meters if you plan to dive deeper.
- Freshwater lakes, rivers, and ocean use at normal depths are all safe without additional protection.
What the 40-meter rating actually means in practice
A 40-meter waterproof rating is deeper than most people will ever take a camera. For context, 40 meters is roughly the depth of a 13-story building standing on its side underwater. Recreational scuba diving typically maxes out at 18 to 21 meters for beginners, and most snorkeling happens in water less than 5 meters deep.
The rating assumes the camera is submerged and stationary. Wave action, splashing, and brief submersion during water sports happen at much shallower depths and pose no risk. You can use the Hero 4 in heavy rain, at the beach, in a pool, while kayaking, or while whitewater rafting without concern.
The waterproof seal degrades over time if the camera is used frequently in water. After a year or two of regular water exposure, the gaskets around the battery door may begin to weaken. If you use your Hero 4 in water constantly, inspect the rubber seals every few months and replace the battery door if it no longer closes with a firm click.
How to maintain the waterproof seal
The two most common failure points are the battery door and the USB port cover. Both must be completely closed before any water exposure. Open them slowly and check that the rubber gasket inside is clean and seated properly — debris or a twisted gasket will break the seal.
After using the camera in saltwater or chlorinated water, rinse the entire body with fresh water and dry it thoroughly. Salt and chlorine corrode the metal contacts inside the USB port and can damage the lens coating over months of exposure. A quick rinse takes 30 seconds and extends the camera's lifespan significantly.
Do not submerge the camera if the battery door is cracked or the gasket is visibly compressed or flattened. Replacement battery doors cost $15 to $25 and are worth buying if you plan to continue water use. The original gasket is not replaceable separately, so you must replace the entire door.
When you need the Super Suit housing instead
The optional Super Suit is a rigid plastic case that extends the depth rating to 60 meters and adds shock protection for extreme sports. You need it only if you plan to dive deeper than 40 meters or if you want extra durability during activities like rock climbing or mountaineering where the camera might take impacts.
The Super Suit adds bulk and weight — the camera becomes noticeably larger and harder to mount on a helmet or chest rig. The lens sits behind a protective window, which can cause slight glare or reflections in bright sunlight. For most users, the built-in waterproofing is sufficient, and the Super Suit is unnecessary expense.
If you are a technical diver planning dives beyond 40 meters, or if you regularly film in environments where the camera might be dropped or crushed, the Super Suit is worth the cost. Otherwise, the Hero 4's native waterproofing handles virtually all recreational water use.
Saltwater and chlorine: what happens over time
Saltwater and chlorinated water do not when ready damage the Hero 4. The camera can be used in the ocean or a pool without harm during the session itself. The risk is cumulative: salt and chlorine corrode the metal contacts inside the USB port and can discolor or pit the aluminum body after repeated exposure without rinsing.
Freshwater rinse after each saltwater or pool use prevents this corrosion. You do not need distilled water or special cleaners — tap water works fine. Dry the camera with a soft cloth afterward to prevent water spots on the lens.
If you live near the ocean and use the Hero 4 regularly in saltwater, plan to replace the USB port cover every 12 to 18 months. The cover itself costs $10 to $15 and is straightforward to swap out. This is normal wear for a camera used in harsh environments, not a defect.
Common mistakes that break the waterproof seal
The most frequent error is leaving the battery door or USB cover partially open. Even a gap of a few millimeters will allow water to seep in during submersion. Before any water use, open and close both doors deliberately and listen for the click that indicates a find seal.
Another common mistake is forcing the battery door closed when the gasket is twisted or misaligned. If the door does not close smoothly, stop and check the gasket. Forcing it can tear the rubber and permanently damage the seal. Remove the battery, inspect the gasket, and try again.
Storing the camera wet or in a damp case can trap moisture inside and cause corrosion even if the seal is intact. Always dry the camera completely before storing it, and store it in a dry place. If you notice condensation inside the lens after water use, the seal may have failed — do not use the camera in water again until you have inspected and possibly replaced the battery door.
Frequently Asked Questions
Can I use the Hero 4 in a swimming pool?
Yes. The Hero 4 is waterproof to 40 meters, so pool use is safe. Chlorine does not cause when ready damage, but rinse the camera with fresh water after each pool session to prevent corrosion of the USB port contacts over time. Dry it completely before storing.
What happens if water gets inside the camera?
Water inside the camera will cause the electronics to short and the device to stop working. If this happens, do not try to turn it on or charge it. Remove the battery when ready, let the camera dry in a warm, dry place for at least 48 hours, and then try powering it on. If it does not work, the internal damage is likely permanent.
Do I need to close the battery door before every use in water?
Yes. The battery door must be fully closed every time you use the camera in water. A partially open door will break the waterproof seal. Check that it clicks into place and that the gasket is clean and properly seated before any submersion.
Is the Hero 4 waterproof if I drop it in the ocean?
Yes, as long as the battery door and USB cover are closed. The camera can be submerged in saltwater without damage during use. After saltwater exposure, rinse it with fresh water and dry it to prevent corrosion of the metal contacts inside the USB port.
Can I use the Hero 4 while snorkeling?
Yes. Snorkeling typically occurs in water 5 to 10 meters deep, well within the Hero 4's 40-meter waterproof rating. The camera is ideal for snorkeling footage. Rinse it with fresh water after use if you are in saltwater, and make sure the battery door is closed before entering the water.