The most common reasons your GoPro stops charging

A GoPro that won't charge usually has one of five problems: a dirty charging port, a damaged USB cable, a faulty charging dock, a battery that has reached the end of its life, or a camera that has entered a low-power state. Start by checking the charging port on the camera itself—look inside with a flashlight for lint, sand, or corrosion. Even a small amount of debris blocks the electrical contacts and prevents charging from starting.

The second most common culprit is the cable. GoPro cameras use USB-C ports on newer models (Hero 11, Hero 12) and micro-USB on older ones (Hero 9, Hero 10). If you are using a third-party cable, it may not deliver enough power or may have a loose connection inside. Try a different cable first—ideally one you know works with another device—before assuming the camera is broken.

Key Takeaways

  • Clean the charging port with a dry cotton swab or soft brush, because lint and sand are the most common reason charging fails.
  • Test with a different USB cable and power adapter, because a faulty cable causes more charging problems than a faulty camera.
  • Restart the camera by holding the power button for ten seconds, because a frozen system sometimes prevents charging from registering.
  • Replace the battery if the camera is over two years old and the port and cable are clean, because lithium batteries degrade and stop accepting charge.
  • Use the official GoPro charging dock or a wall charger rated for at least 2 amps, because low-power chargers may not deliver enough current to start charging.

Clean the charging port properly

Dirt inside the charging port is the single most common reason a GoPro will not charge. Sand from beaches, lint from pockets, and corrosion from moisture all block the metal contacts. Use a dry cotton swab or a soft-bristled toothbrush to gently clean inside the port. Do not use water, compressed air, or metal tools—water can cause corrosion, compressed air can force debris deeper, and metal can scratch the contacts and make the problem worse.

Look directly into the port with a flashlight and make sure you can see the metal pins clearly. If you see white or green discoloration on the pins, that is corrosion from moisture exposure. In that case, let the camera sit in a warm, dry place for 24 hours before trying to charge again. If corrosion is heavy, the port may need professional cleaning or replacement.

Test with a different cable and power source

Before you assume the camera is broken, test with a cable you know works. Borrow a USB-C or micro-USB cable from a phone or tablet and try charging with that. If the camera charges with a different cable, your original cable is faulty and needs replacement. GoPro sells official cables, but any high-quality USB-C or micro-USB cable from a reputable brand will work.

Also test with a different power adapter. Plug into a wall outlet instead of a computer USB port, or try a different wall outlet altogether. Computer USB ports often deliver only 0.5 amps, which is not enough to charge a GoPro battery. Use a wall charger rated for at least 2 amps—most phone chargers are 2 amps or higher. If the camera charges with a different adapter, your original charger is the problem.

Force restart the camera

Sometimes the camera's system freezes and stops responding to the charging signal, even though the port and battery are fine. Force restart the camera by holding the power button down for ten seconds without releasing. The screen will go black. Wait five seconds, then press the power button once to turn it back on. After the restart, plug it in and see if charging begins.

If you see the charging indicator light (usually a red or blue LED near the port) turn on within 30 seconds of plugging in, charging is working. If no light appears after a full minute, move to the next step.

Check the battery itself

GoPro batteries are lithium-ion and degrade over time. A battery that is more than two years old, or one that has been through many charge cycles, may no longer accept a charge even if the port and cable are clean. The only way to know for certain is to test with a different battery. If you have a spare battery or can borrow one from a friend, insert it and try charging. If the spare battery charges normally, your original battery has reached the end of its life and needs replacement.

GoPro sells replacement batteries for each camera model. Check your camera's model number (usually printed on the back) and order the matching battery. Batteries are inexpensive and usually arrive within a few days.

Use the official charging dock or a high-power charger

The official GoPro charging dock is designed to deliver the correct voltage and current for your specific camera model. If you have been using a generic USB charger or a computer port, switch to the official dock. Plug the dock into a wall outlet, not a computer, and insert the camera firmly until you hear or feel a click.

If you do not have the official dock, use a wall charger rated for at least 2 amps and a high-quality USB cable. Avoid dollar-store chargers and heavily discounted third-party docks—they often deliver inconsistent power and can damage the battery or port over time. A good third-party option is any charger that is certified by USB-IF (the USB standards organization) or carries a reputable brand name.

When to contact GoPro support

If you have cleaned the port, tested with a different cable and charger, force restarted the camera, and confirmed the battery is the problem by testing a spare, the camera itself may have a hardware fault. Contact GoPro support with the camera's serial number (found in Settings or on the back of the device) and a description of what you have already tried. GoPro offers a one-year warranty on cameras and batteries, and support can tell you whether repair or replacement is available.

Keep your receipt or proof of purchase handy when you contact them. If the camera is still under warranty and the problem is not user damage, GoPro will usually repair or replace it at no cost.

Frequently Asked Questions

How long should my GoPro take to charge?

A full charge usually takes two to three hours with the official charger or a high-power wall adapter. If charging is taking much longer than that, the charger may be delivering too little power. Try a different charger rated for at least 2 amps.

Can I charge my GoPro while it is recording?

Yes, you can charge while the camera is on and recording, but charging will be slower because the battery is being used at the same time. For fastest charging, turn the camera off completely before plugging it in.

What does the charging light mean?

A solid red or blue light means the battery is charging. A blinking light usually means the battery is nearly full or there is a connection problem. No light at all means either the port is not making contact or the charger is not delivering power.

Is it safe to leave my GoPro plugged in overnight?

Yes, modern GoPro batteries have overcharge protection built in. Once the battery reaches 100 percent, charging stops automatically. Leaving it plugged in overnight will not damage the battery.

Can I use any USB-C cable to charge my GoPro?

Any USB-C cable will physically fit the port, but not all deliver the same power. Use a cable rated for at least 2 amps and from a reputable brand. Cheap cables may have loose connections inside or deliver inconsistent power, which can slow charging or damage the battery over time.