Check the Battery First

A GoPro that won't power on almost always has a dead or improperly seated battery. The battery may look fine but hold no charge, or it may not be making full contact with the camera's terminals. Remove the battery door on the bottom or side of your camera (depending on your model), take the battery out completely, and look at both the battery contacts and the camera's metal terminals. If you see corrosion, white or green buildup, or dirt, wipe both surfaces gently with a dry cloth.

Reinsert the battery firmly until you hear or feel it click into place. The battery should sit flush against the camera body with no gaps. If the battery still does not work, try charging it in a separate charger if you have one—sometimes the camera's charging port is the problem, not the battery itself. If you do not have a spare battery, borrow one from a friend with the same GoPro model to test whether your camera powers on with a different battery.

Key Takeaways

  • A dead or loose battery is the most common reason a GoPro will not turn on, and removing and reinserting it often solves the problem.
  • Corrosion on battery contacts or camera terminals can prevent power from flowing, and you can clean both with a dry cloth.
  • If your camera charges but will not power on, a software crash may be the cause, and a hard reset can restore function.
  • Water damage or a faulty charging port may require professional service, but you can test this by trying a different battery first.

Perform a Hard Reset

If the battery is charged and seated correctly but your GoPro still will not turn on, the camera's software may have crashed. A hard reset clears the camera's memory and restarts its operating system. To perform a hard reset, press and hold the power button for 10 to 15 seconds, even if nothing appears to happen on the screen. Release the button and wait 30 seconds, then press the power button once to turn the camera on normally.

If your GoPro has a removable battery, you can also perform a reset by removing the battery, waiting 30 seconds, and reinserting it. This forces the camera to restart from scratch. Hard resets do not erase your footage or settings—they straightforward clear temporary files that may be preventing the camera from starting.

Test the Charging Port and Cable

If your camera will not power on even with a fully charged battery, the charging port may be damaged or blocked. Inspect the USB-C or micro-USB port (depending on your model) for debris, lint, or corrosion. Use a flashlight to look inside the port and a dry toothpick or soft brush to gently remove any blockage. Do not use metal objects, which can damage the port's internal contacts.

Try charging your GoPro with a different USB cable and power adapter. A faulty cable can prevent charging even if the port itself is fine. If you have access to a computer, plug the camera in via USB and check whether your computer recognizes it. If the computer detects the camera but it still will not turn on, the issue is likely internal and may require professional service.

Check for Water Damage or Physical Damage

GoPro cameras are designed to be waterproof when the battery door is sealed correctly, but water can enter through a loose door or a cracked lens. If your camera was recently exposed to water or dropped, water may have reached the internal circuits. Look for condensation inside the lens, discoloration on the circuit board visible through any openings, or a musty smell when you open the battery door.

If you suspect water damage, do not attempt to charge or power on the camera repeatedly, as this can cause short circuits. Instead, remove the battery, open all doors and compartments, and allow the camera to air-dry in a warm, dry place for at least 24 hours. After drying, try powering it on with a freshly charged battery. If water damage is extensive, the camera will likely need professional repair or replacement.

Update or Reinstall Camera Firmware

In rare cases, corrupted firmware can prevent a GoPro from turning on. Firmware is the software that runs your camera's basic functions. If you can connect your camera to a computer via USB (even if the screen does not light up), you may be able to update or reinstall the firmware using GoPro's desktop software or the GoPro app on your phone.

Visit the official GoPro support website and read the latest firmware file for your specific camera model. Follow GoPro's instructions to connect your camera to a computer and install the update. This process can sometimes revive a camera that will not power on due to software corruption. If your camera does not appear on your computer at all, this approach will not work, and you will need to contact GoPro support.

When to Contact GoPro Support

If you have tried all the steps above and your GoPro still will not turn on, the problem is likely a hardware failure inside the camera. This could be a faulty power button, a damaged battery connector, a failed charging circuit, or internal water damage. These issues cannot be fixed at home and require professional service.

Contact GoPro support through their official website and describe the steps you have already taken. Provide your camera's model number and serial number, which you can find on the battery door or in the camera's settings menu if it powers on. GoPro may offer a warranty repair, a replacement, or a discount on a new camera depending on your model's age and your warranty coverage. Keep your proof of purchase if you have it, as this can speed up the process.

Frequently Asked Questions

Can I turn on my GoPro without a battery?

No. GoPro cameras require a battery to power on, even when connected to a charger or computer. The battery is the only power source the camera recognizes. If your battery is dead, charge it fully before attempting to power on the camera.

How long does a GoPro battery take to charge?

Most GoPro batteries take two to three hours to charge fully using the standard USB charger that comes with the camera. Fast chargers can reduce this time to one to two hours, but they may generate more heat. Always use an official GoPro charger or a reputable third-party charger to avoid damaging the battery.

What does it mean if my GoPro shows a red light but won't turn on?

A red light usually indicates the battery is low or the camera is charging. If the light stays red and the camera does not power on after several hours of charging, the battery may be defective or the charging port may be damaged. Try a different battery or charger to narrow down the problem.

Will my footage be lost if I do a hard reset?

No. A hard reset only clears temporary files and restarts the camera's software. All your recorded videos and photos remain on the camera's memory card and will not be affected by a reset.

Is it safe to leave my GoPro plugged in overnight?

Yes. Modern GoPro batteries have built-in protection that stops charging once the battery is full, so leaving the camera plugged in overnight will not overcharge or damage the battery. However, extended heat exposure can shorten battery lifespan over time, so unplugging once fully charged is a good habit.