The fastest sources for replacement slats are the original manufacturer, big-box retailers, and online specialists

If you know your blind brand and model, contact the manufacturer directly — most sell replacement slats through their website or customer service line. This is the surest way to get an exact match. If you do not have the original packaging or paperwork, measure the slat width (usually 1 inch or 2 inches), note the material (vinyl, wood, aluminum), and count how many you need.

Home Depot and Lowe's stock replacement slats for common brands in-store and online. Walmart carries a smaller selection but often at lower prices. Amazon and eBay have the widest range of brands and styles, though shipping times vary. Specialty blind retailers like SelectBlinds and 3 Day Blinds also sell slats individually or in bulk.

Local blind repair shops can order slats for you if you bring in a sample or measurements. This route costs more but saves you the guesswork about fit. Many will install them for an additional fee.

Key Takeaways

  • The manufacturer's website or customer service is the most reliable source if you know the brand and model number.
  • Home Depot, Lowe's, and Walmart carry common replacement slats in-store, so you can see them before buying.
  • Online retailers like Amazon and eBay offer the widest selection but require you to verify measurements and material type before ordering.
  • Blind repair shops can source slats for you and often install them, though this costs more than buying and installing yourself.
  • You need to know the slat width, material, and color to find an exact or close match.

How to identify your blind type before you shop

Measure the width of one slat from edge to edge. Most blinds use 1-inch or 2-inch slats. Write down the material: vinyl is the cheapest and most common, wood looks better but costs more and warps in humidity, and aluminum is durable and lightweight. Note the color as closely as you can — "white," "ivory," and "cream" are different, and manufacturers use their own names.

If the original box or instruction manual is still in your home, find the brand name and model number. This information is usually printed on a sticker inside the headrail (the top bar that holds the slats). If you cannot find it, take a photo of the blind and bring it to a home improvement store — staff can often identify the brand by sight.

Count how many slats you need to replace. If only a few are damaged, you can buy individual slats. If many are broken or discolored, replacing the whole set may be cheaper than buying them one at a time.

Buying from the manufacturer directly

This is the best option if you have the brand name. Search "[Brand name] replacement slats" or visit the company's website and look for a "Parts" or "Accessories" section. Most manufacturers have a customer service email or phone number. Call or email with your blind model number and they will tell you the exact slat code and price.

Shipping usually takes one to two weeks. Costs range from $0.50 to $3 per slat depending on the material and brand. Some manufacturers offer bulk discounts if you order 20 or more slats at once. Ask whether they sell the slats individually or only in sets of 10 or 20.

If the manufacturer is out of business or you cannot find them, try searching the model number on Google Images — you may find the slats listed on a third-party retailer's site.

Home improvement stores and big-box retailers

Home Depot stocks replacement slats for brands like Levolor, Bali, and Mainstays in most locations. You can browse them in the window treatments aisle or order online for pickup or delivery. Prices are usually $1 to $2 per slat. Lowe's carries a similar selection under brands like Style Selections and Mainstays.

Walmart's blind slat selection is smaller but cheaper — often $0.75 to $1.50 per slat. Target carries slats for their house brand and a few major brands. All three stores let you return unused slats within 30 days if the fit is wrong.

The downside is that these stores do not always stock every color or width. If you need an exact match and the store does not have it in stock, you can order online and pick up in a few days, or have it shipped to your home.

Online retailers and specialty blind shops

Amazon has the largest selection of replacement slats from dozens of brands. Prices range from $0.50 to $5 per slat. Read the reviews carefully — many slats are sold by third-party sellers, and fit can vary. Check the return policy before ordering, as some sellers do not accept returns on slats.

eBay often has bulk lots of slats at lower prices, especially if you need 20 or more. Shipping is slower than Amazon but can save money on large orders. SelectBlinds and 3 Day Blinds both sell replacement slats online and can help you identify your blind type if you are unsure.

Specialty retailers like Blinds.com and Budget Blinds also sell slats individually. These sites usually have detailed product photos and customer reviews that help you verify fit before buying. Shipping typically takes five to ten business days.

Local blind repair and installation shops

Independent blind repair shops can order slats for almost any brand and often have samples on hand. Bring your blind or a slat sample with you. They will measure, identify the brand, and tell you the cost and delivery time — usually three to seven days.

Labor to install the slats ranges from $20 to $50 depending on how many you need replaced and how difficult the blind is to work with. This is worth paying if you are uncomfortable removing and reinstalling slats yourself, or if the blind is expensive and you do not want to risk damaging it.

To find a shop near you, search "blind repair near me" or ask at a local window treatment store. Many will give you a free estimate over the phone if you describe the blind and the damage.

What to check before you buy

Verify the slat width matches your blind. A 2-inch slat will not fit a 1-inch blind. Check the product photos and description carefully — some listings are vague about dimensions. If the listing does not say, contact the seller and ask.

Confirm the color. Manufacturers change paint formulas year to year, so a slat from 2015 may not match one from 2020 even if they are the same brand and color name. If you are replacing only a few slats, order one or two first and hold them up to your blind in natural light before ordering the rest.

Check the return policy. Most online retailers allow returns within 30 days, but some blind slats are final sale. If fit or color is wrong, you want to be able to send them back without losing money.

Frequently Asked Questions

Can I use slats from a different brand if the width matches?

No. Even if the width is the same, the attachment mechanism (how the slat clips into the headrail) is usually brand-specific. A Levolor slat will not stay in a Bali blind. Always match the brand if possible.

What if I cannot find the exact color?

If the exact color is out of stock, order a sample from the manufacturer or retailer and compare it in daylight next to your existing blind. Many people find that a close match is acceptable, especially if you are replacing only a few slats. If the difference is too noticeable, ask the retailer when the original color will be back in stock.

Are replacement slats cheaper than buying new blinds?

Usually yes. A set of replacement slats costs $10 to $40 depending on how many you need. New blinds for the same window cost $50 to $300 or more. Replacing slats makes sense unless the blind is very old or the headrail is damaged.

How do I know if my blind brand is still in business?

Search the brand name plus "customer service" or "replacement parts." If the website is active and has a contact form or phone number, the company is likely still operating. If the website is gone or outdated, try searching the model number on Amazon or eBay — third-party sellers often stock slats for discontinued brands.

Can I paint slats to match my blind?

Vinyl and aluminum slats can be painted with acrylic latex paint, but the finish will not be as smooth or durable as the original. Wood slats can be stained or painted. Test on one slat first to see if the color and finish match. This is a budget option but may look noticeably different under close inspection.